Chapter 25 System
Figure 225 System General Setup
The following table describes the labels in this screen.
Table 147 System General Setup
LABEL | DESCRIPTION |
General Setup |
|
|
|
System Name | Choose a descriptive name for identification purposes. It is recommended you enter |
| your computer’s “Computer name” in this field. This name can be up to 30 |
| alphanumeric characters long. Spaces are not allowed, but dashes |
| underscores "_" are accepted. |
|
|
Domain Name | Enter the domain name (if you know it) here. If you leave this field blank, the ISP |
| may assign a domain name via DHCP. |
| The domain name entered by you is given priority over the ISP assigned domain |
| name. |
|
|
Administrator | Type how many minutes a management session (either via the web configurator or |
Inactivity Timer | telnet) can be left idle before the session times out. The default is 5 minutes. After it |
| times out you have to log in with your password again. Very long idle timeouts may |
| have security risks. A value of "0" means a management session never times out, |
| no matter how long it has been left idle (not recommended). |
|
|
Password |
|
|
|
Old Password | Type the default password or the existing password you use to access the system in |
| this field. |
|
|
New Password | Type your new system password (up to 30 characters). Note that as you type a |
| password, the screen displays a (*) for each character you type. After you change |
| the password, use the new password to access the ZyXEL Device. |
|
|
Retype to | Type the new password again for confirmation. |
Confirm |
|
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
376 |
| |
| ||
|
|
|