|
| Chapter 23 Remote Management Configuration |
| Table 138 Remote Management: HTTP | |
| LABEL | DESCRIPTION |
| Access Status | Select a ZyXEL Device interface from Access Status on which incoming HTTPS |
|
| access is allowed. |
|
| You can allow only secure web configurator access by setting the HTTP Access |
|
| Status field to Disable and setting the HTTPS Access Status field to an |
|
| interface(s). |
|
|
|
| Secure Client | A secure client is a “trusted” computer that is allowed to communicate with the |
| IP | ZyXEL Device using this service. |
|
| Select All to allow any computer to access the ZyXEL Device using this service. |
|
| Choose Selected to just allow the computer with the IP address that you specify to |
|
| access the ZyXEL Device using this service. |
|
|
|
| Apply | Click Apply to save your settings back to the ZyXEL Device. |
|
|
|
| Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
|
23.4 Telnet
You can configure your ZyXEL Device for remote Telnet access as shown next. The administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.
Figure 196 Telnet Configuration on a TCP/IP Network
23.5 Configuring Telnet
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
| 347 |
|
|