Lexicon SDP-40 manual Main Off deactivates the Main Zone

Page 19

SDP-40

Basic Operation

2The Front Panel Display indicates the current input name (top-left); the current listening mode name (bottom-left); the current input type (top-center); and the current volume level (right). This 2 by 20 character display can be used to view the menus, one menu item at a time. The up and down MENU arrows can be used to scroll through all menu items, provided the Main remote control command bank is active (see page 2-8)

3The IR Receiver receives infrared commands from the remote control. There are three LEDs located in this area: an amber LED blinks when an infrared command is received; a red LED lights when the analog-to-digital converters are overloading; and a blue LED lights when the unit is on (even when the front panel display is deactivated).

4The Volume Knob adjusts the volume level in the Main Zone. When adjustments are made, volume level is shown in dB on the on-screen and front panel displays. A horizontal bar graph illustrates adjustments.

5The Mode Up and Down Buttons scroll through available listening modes in the Main Zone. Pressing the Mode Up button selects the previous listening mode; pressing the Mode Down button selects the next listening mode. See page 2-17 for more information about mode selection using the Mode up and down buttons.

6Mute toggles between muting the volume level in the Main Zone, and restoring the volume to its original level. The first press lowers the volume level in the Main Zone and lights the amber LED on this button. The message “MUTE ON” appears in the top-left corner of the on-screen and front panel displays.

The second press restores the volume in the Main Zone to its original level. Mute level can be set in the VOLUME CONTROL SETUP menu (see page 3-34).

The Mute LED lights whenever mute is activated either manually or automatically by the unit. For example, the unit will briefly activate mute when changing input types or listening modes.

7Main Input Selection Buttons select the input in the Main Zone, and light a corresponding blue LED. When the unit is in standby, pressing one of these buttons also activates the Main Zone. (Zone 2 and the Record Zone will remain deactivated until one of those inputs is selected.)

8Main Off deactivates the Main Zone.

9Zone 2 Input Selection Buttons select the input in Zone 2, and light a corresponding amber LED. When the unit is in standby, pressing one of these buttons also activates Zone 2. (The Main and Record Zones will remain deactivated until one of those inputs is selected.)

10Zone 2 Off deactivates Zone 2.

11Record Input Selection Buttons select the input in the Record Zone, and light a corresponding red LED. When the unit is in standby, pressing one of these buttons also activates the Record Zone. (The Main Zone and Zone 2 will remain deactivated until one of those inputs is selected.)

12Record Off deactivates the Record Zone.

2-3

Page 18 Page 20
Image 19
Page 18 Page 20
Contents SDP-40 Important Safety Instructions JBL Synthesis Introduction Audio Controls Menu Instruções DE Segurança IMPORTANTEs PortugueseEspañol Instrucciones Importantes DE Seguridad DeutschItaliano Importanti Norme DI Sicurezza Français Instructions DE Sûreté ImportantesSuomi Dansk Vigtig Information OM SikkerhedNorsk Viktig Informasjon OM Sikkerhet US Unpacking and Inspection Getting Started Getting Started Highlights Navigating the Menus Using the DocumentationUser Guide Symbols Location ConsiderationsTWO-LINE Status Restoring FACTORY-DEFAULT SettingsExit Basic Operation IR Receiver Front PanelBlue LED Main Off deactivates the Main Zone Basic Operation Basic Operation Rear Panel Command Bank Selection Remote ControlBank Selection BankStandby LightSelection Buttons InputOSD BlueVOL + Mode +Mute StatMenu 2CH ArrowsFamily ModeUnderstanding the Zones Music Understanding Listening Mode SelectionInput Setup Menu Mode ButtonsChannel Digital Mode Family Selection ButtonsSetup Menu Displays SetupVolume Controls Rear Panel ConfigDVD1 Input SetupName Restore Default NameName Digital COAX-1 DigitalAuto Default Parameter Value ValuesAnalog Anlg in LVLAnlg in LVL Auto ManualVideo VideoComponent Inputs Dts-ESFilm Main Advanced ZONE2 Advanced Record Advanced DVD1 D Mode Main Advanced Analog Bypass ON, OFF Input Select AUTO, ANALOG, DigitalVideo Main AdvancedZONE2 Advanced Component OSD ON, OFFAnalog Input SelectRecord Advanced Record Anlg in LVLDigital Bypass ON, OFF DIG OUT RateDetermining Crossover Settings Speaker Setup Custom SetupLowpass Filter Frequency Response CurvesCenter Custom SetupFront L/R FULL, 30Hz to 120Hz, THX 80HzSide L/R Side L/RFULL, 30Hz to120Hz, THX 80Hz, None Rear L/RSUB Xover SUB L/RSUB Xover SUB L/RLFE OFF LFE ON, OFFDefault Synthesis 7CH SetupParameter Value Values Speaker Distances SetupInternal Noise Test Levels CalibrationDacs Calibration Dacs Calibration Levels CalibrationSUB Limiters LFE Limiter ON, OFF CAL Noise ON, OFFLimiter ON, OFF Limit ADJStereo & 5.1 Anlg Stereo InputsStatus Display Setup ON-SCREEN DisplayPosition ON-SCREEN Display Sync DelayFront Panel Display Custom Name OFF Edit Custom NameCustom Name Edit Custom NameZone PWR on Volume Control SetupMain PWR on Mute LevelTrigger Trigger SetupRemote Operation Program OperationLock Options SetupModes Audio CntrlAudio Controls Menu Bass Audio ControlsAudio Controls Bass Audio Controls Tilt EQ TrebleAudio Controls Treble Tilt EQAudio Controls ZONE2 Balance Loudness ON, OFF Audio ControlsAudio Controls Balance Audio Controls FaderAudio Controls Record Balance Record BalanceMode Adjust Menu Listening Mode Descriptions LOGIC7 Film Mode AdjustMode Adjust L7 Film LOGIC7 Music Mode Adjust L7 TVMode Adjust Music LOGIC7 TVDolby PRO Logic Mode Adjust PLMode Adjust L7 PRO Logic Dolby PRO Logic II THXDefault Parameter Values Default Value Mode Adjust L7 PL II MusicDolby PRO Logic II Music Party Mode Adjust 2-CHANNELMode Adjust Party ChannelMono Mode Adjust MonoDefault ParameterValueValues Mode Adjust Mono LogicMode Adjust 5.1L7 Film Mode Adjust Mono SurroundMono Surround Mode Adjust 5.1L7 Music Mode Adjust 5.1L7 TVTHX Mode Adjust 5.1 SUR EXTHX Surround EX or 5.1 THX THX Surround EX2-CHANNEL Mode Adjust L7 DigitalMode Adjust 5.1 2-CHANNEL Dolby DigitalMode Adjust 5.1 Mono Logic Mode Adjust 5.1 MonoMono Dts-ES LOGIC7 film Mode Adjust 5.1 Mono SurrDts-ES LOGIC7 Music Mode AdjustDts-ES THX Dts Mode Adjust 2-CHANDts and dts-ES Dts-ES 2-CHANNELChannel Bypass Mode Adjust 5.1 BypassMode Adjust 2CH Bypass BypassCustom Custom VS PresetReset Mode Output LevelsParameter Values Status Menus2CH Status Menu 2CH Bypass Status MenuBypass Status Menu Dolby Digital Status MenuAnalog Status Menu Academy Filter ON, OFF Mode Parameter DescriptionsDts Status Menu Spkr Enhance ON, OFFCntr DLY Samples Bass Enhance ON, OFFCenter MIX ChannelsEffect LVL DimensionCTR Width CustomOutput Levels LFE MIXMaster Level ModeSurround EX ON, OFF Sound StageSurr Rolloff Surround DLYTroubleshooting and Maintenance Troubleshooting If ALL Else Fails Humming Sound is Present in the AudioRF Interference is Present in the Audio or Video Unit is Exhibiting Erratic BehaviorRoutine Maintenance Appendix Performance Zone 2 and Record Zone SpecificationsAudio Inputs and Outputs Performance Main ZoneOther Video Inputs and OutputsPerformance Composite & S-video Performance Component VideoDeclaration of Conformity On page A-6 Menu TreeFrom page A-5 DVD1 Input Setup Name None Side L/R Speakers Dacs Calibration Film Auto Azimuth Input Type BYP Additional Listening Mode MenusInput Setup Installation WorksheetRear Panel Config Index Index Name Tilt EQ Synthesis Limited Warranty JBL Synthesis
Top Page Image Contents