Lexicon SDP-40 manual Sound Stage, Surr Rolloff, Surround DLY, Surround EX ON, OFF, Surround MIX

Page 98

The MODE ADJUST Menu

JBL

SOUND STAGE

(FRONT, NEUTRAL, REAR)

SOUND STAGE dynamically adjusts the relative balance of the outputs when no surround signals are present. When set to FRONT, the SIDE L/R and REAR L/R outputs are attenuated, shifting the per- ceived balance of the sound field to the front of the listening space. When set to NEUTRAL, the SIDE L/R and REAR L/R outputs are attenuated slightly, shifting the perceived balance of the sound field to the center of the listening space. When set to REAR, the SIDE L/R and REAR L/R outputs are not attenuated, preserving the intended balance of the sound field.

SUB L/R and SUB L/R LVL

(OFF, -30 to +12dB)

SUB L/R (Subwoofer Left/Right) and SUB L/R LVL (Subwoofer Left/Right Level) adjust the output level of the SUBWOOFER L/R outputs.

SURR ROLLOFF

(500Hz to 20.0kHz, OFF)

SURR ROLLOFF (Surround Rolloff) simulates the high frequency rolloff that occurs in real spaces. When set within its 500Hz to 20kHz range, the unit applies a high-frequency rolloff to the SIDE L/R and REAR L/R outputs. When set to OFF, the unit does not apply this high-frequency rolloff.

SURROUND DLY

(0 to 15ms)

SURROUND DLY (Surround Delay) increases the perceived depth of the listening space by delaying the arrival time of the SIDE L/R and REAR L/R outputs. This time delay can be set within a range of 0 to 15ms. Increasing this time is recommended when a greater sense of depth is desired in the listening space.

SURROUND EX

(ON, OFF)

SURROUND EX activates and deactivates the 5.1 THX SURROUND EX listening mode, provided both side and rear speakers are select- ed (see page 3-18). The default value of the SURROUND EX parameter is ON, which activates 5.1 THX SURROUND EX. When set to OFF, the 5.1 THX SURROUND EX listening mode becomes

5.1THX. (See page 5-10 for more information.) Toggling the setting of the SURROUND EX parameter produces low-level clicks in the front speakers.

SURROUND MIX

(-5 to +5dB)

SURROUND MIX adjusts the relative level of the surround channels that are encoded into the FRONT L/R outputs. The recommended setting is +2 to +3dB for all input types.

VOCAL ENHANCE

(+0.0dB, +3.0dB, +6.0dB)

VOCAL ENHANCE adjusts the level of dialog boost in the CENTER output. Increasing this level is recommended for listening at lower volume levels or for increasing dialog intelligibility.

5-24

Image 98
Contents SDP-40 Important Safety Instructions JBL Synthesis Introduction Audio Controls Menu Portuguese Instruções DE Segurança IMPORTANTEsDeutsch Español Instrucciones Importantes DE SeguridadFrançais Instructions DE Sûreté Importantes Italiano Importanti Norme DI SicurezzaDansk Vigtig Information OM Sikkerhed SuomiNorsk Viktig Informasjon OM Sikkerhet US Unpacking and Inspection Getting Started Getting Started Highlights Location Considerations Using the DocumentationUser Guide Symbols Navigating the MenusExit Restoring FACTORY-DEFAULT SettingsTWO-LINE Status Basic Operation Blue LED Front PanelIR Receiver Main Off deactivates the Main Zone Basic Operation Basic Operation Rear Panel Remote Control Command Bank SelectionLight BankStandby Bank SelectionInput Selection ButtonsBlue OSDMode + VOL +Menu StatMute Arrows 2CHMode FamilyUnderstanding the Zones Mode Buttons Understanding Listening Mode SelectionInput Setup Menu MusicMode Family Selection Buttons Channel DigitalSetup Menu Rear Panel Config SetupVolume Controls DisplaysInput Setup DVD1Name Restore Default NameName Digital Digital COAX-1Anlg in LVL Default Parameter Value ValuesAnalog AutoManual Anlg in LVL AutoVideo VideoComponent Film Dts-ESInputs Main Advanced ZONE2 Advanced Record Advanced DVD1 D Mode Main Advanced Input Select AUTO, ANALOG, Digital Analog Bypass ON, OFFComponent OSD ON, OFF Main AdvancedZONE2 Advanced VideoInput Select AnalogRecord Advanced DIG OUT Rate Anlg in LVLDigital Bypass ON, OFF RecordSpeaker Setup Custom Setup Determining Crossover SettingsFrequency Response Curves Lowpass FilterFULL, 30Hz to 120Hz, THX 80Hz Custom SetupFront L/R CenterRear L/R Side L/RFULL, 30Hz to120Hz, THX 80Hz, None Side L/RSUB L/R SUB L/RSUB Xover SUB XoverLFE ON, OFF LFE OFFParameter Value Values Synthesis 7CH SetupDefault Setup Speaker DistancesLevels Calibration Internal Noise TestDacs Calibration SUB Limiters Levels CalibrationDacs Calibration Limit ADJ CAL Noise ON, OFFLimiter ON, OFF LFE Limiter ON, OFFStereo Inputs Stereo & 5.1 AnlgPosition Display Setup ON-SCREEN DisplayStatus Front Panel Display Sync DelayON-SCREEN Display Edit Custom Name Edit Custom NameCustom Name Custom Name OFFMute Level Volume Control SetupMain PWR on Zone PWR onProgram Operation Trigger SetupRemote Operation TriggerAudio Cntrl SetupModes Lock OptionsAudio Controls Menu Audio Controls Bass Audio ControlsBass Tilt EQ TrebleAudio Controls Treble Audio Controls Tilt EQAudio Controls Fader Loudness ON, OFF Audio ControlsAudio Controls Balance Audio Controls ZONE2 BalanceRecord Balance Audio Controls Record BalanceMode Adjust Menu Mode Adjust L7 Film Mode AdjustListening Mode Descriptions LOGIC7 Film LOGIC7 TV Mode Adjust L7 TVMode Adjust Music LOGIC7 MusicDolby PRO Logic II THX Mode Adjust PLMode Adjust L7 PRO Logic Dolby PRO LogicDolby PRO Logic II Music Mode Adjust L7 PL II MusicDefault Parameter Values Default Value Channel Mode Adjust 2-CHANNELMode Adjust Party PartyMode Adjust Mono Logic Mode Adjust MonoDefault ParameterValueValues MonoMono Surround Mode Adjust Mono SurroundMode Adjust 5.1L7 Film Mode Adjust 5.1L7 TV Mode Adjust 5.1L7 MusicTHX Surround EX Mode Adjust 5.1 SUR EXTHX Surround EX or 5.1 THX THXDolby Digital Mode Adjust L7 DigitalMode Adjust 5.1 2-CHANNEL 2-CHANNELMono Mode Adjust 5.1 MonoMode Adjust 5.1 Mono Logic Mode Adjust 5.1 Mono Surr Dts-ES LOGIC7 filmDts-ES THX Mode AdjustDts-ES LOGIC7 Music Dts-ES 2-CHANNEL Mode Adjust 2-CHANDts and dts-ES DtsBypass Mode Adjust 5.1 BypassMode Adjust 2CH Bypass Channel BypassOutput Levels Custom VS PresetReset Mode Custom2CH Bypass Status Menu Status Menus2CH Status Menu Parameter ValuesAnalog Status Menu Dolby Digital Status MenuBypass Status Menu Spkr Enhance ON, OFF Mode Parameter DescriptionsDts Status Menu Academy Filter ON, OFFChannels Bass Enhance ON, OFFCenter MIX Cntr DLY SamplesCustom DimensionCTR Width Effect LVLMode LFE MIXMaster Level Output LevelsSurround DLY Sound StageSurr Rolloff Surround EX ON, OFFTroubleshooting and Maintenance Troubleshooting Unit is Exhibiting Erratic Behavior Humming Sound is Present in the AudioRF Interference is Present in the Audio or Video If ALL Else FailsRoutine Maintenance Appendix Performance Main Zone SpecificationsAudio Inputs and Outputs Performance Zone 2 and Record ZonePerformance Component Video Video Inputs and OutputsPerformance Composite & S-video OtherDeclaration of Conformity Menu Tree On page A-6From page A-5 DVD1 Input Setup Name None Side L/R Speakers Dacs Calibration Film Auto Azimuth Additional Listening Mode Menus Input Type BYPInstallation Worksheet Input SetupRear Panel Config Index Index Name Tilt EQ Synthesis Limited Warranty JBL Synthesis