Lexicon SDP-40 manual Anlg in LVL, Default Parameter Value Values, Auto, Analog None

The SETUP Menu

JBL

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS

LOCK OPTIONS

INPUT SETUP

DVD1

DVD2

LD

TV

SAT

VCR

CD

PVR

GAME

TAPE

TUNER

AUX

DVD1 INPUT SETUP

NAME			DVD1
DIGITAL IN		COAX-1
ANALOG IN		NONE
ANLG IN LVL		AUTO
VIDEO IN		S-VIDEO-1
COMPONENT IN			1
2-CH		L7	FILM
	D	5.1 L7	FILM
		dts L7	FILM

MAIN ADVANCED

ZONE2 ADVANCED

RECORD ADVANCED

DVD1 ANALOG IN

ANALOG-1

ANALOG-2

ANALOG-3

ANALOG-4

ANALOG-5

ANALOG-6 *

ANALOG-7 *

ANALOG-8 *

NONE

* When REAR PANEL CONFIG

is set to 5 STEREO & 5.1

ANLG (see page 3-30), 5.1

ANALOG will appear in

DVD1 is used as an example in this illustration, and will continue to be used as an example throughout this section. Whenever “DVD1” appears as a step in a menu path, any other input may be substituted.

place of these menu items.

ANALOG IN

SETUP INPUTS DVD1 ANALOG IN

Selecting ANALOG IN accesses the ANALOG IN menu, which can be used to assign the analog input connector for the selected input. The appearance of the ANALOG IN menu depends on the REAR PANEL CONFIG setting (see page 3-30). When 8 STEREO INPUTS is selected on the REAR PANEL CONFIG menu, the ANALOG IN menu will appear as it does in the illustration above. When 5 STEREO & 5.1 ANLG is selected on the REAR PANEL CONFIG menu, ANALOG-6, 7, and 8 on the ANALOG IN menu will be replaced with 5.1 ANALOG.

Note:

When ANALOG IN is set to NONE, the INPUT SELECT parameter on the MAIN ADV menu is automatically set to DIGITAL (see page 3-13).

ANLG IN LVL

SETUP INPUTS DVD1 ANLG IN LVL

Selecting ANLG IN LVL accesses the ANLG IN LVL menu, which can be used to adjust analog input levels. Despite industry attempts at standardization, analog sources have a wide range of output levels. To compensate for this, each of the eight analog inputs on the unit can be assigned a different analog input level. This assures optimum performance regardless of source.

	Default
Parameter	Value	Values
AUTO	ON	ON, OFF
MANUAL	+0dB	-18 to +12dB
AUTO		(ON, OFF)

AUTO provides automatic control of analog input levels. When set to ON, the unit monitors and automatically optimizes analog input

3-6