Lexicon SDP-40 manual Volume Control Setup, Main PWR on, Mute Level, Zone PWR on, REC PWR on

The SETUP Menu

JBL

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS

LOCK OPTIONS

VOLUME CONTROL SETUP

MAIN PWR ON	FULL
MUTE LEVEL	-30dB
ZONE PWR ON	-30dB
REC PWR ON	-30dB

VOLUME CONTROL SETUP

	Default
Parameter	Value	Values
MAIN PWR ON	-30dB	LAST LVL, -80 to +6dB
MUTE LEVEL	FULL	FULL, -40dB, -30dB,
		-20dB, -10dB
ZONE PWR ON	-30dB	LAST LVL, -80 to +6dB
REC PWR ON	-30dB	LAST LVL, -80 to +6dB
MAIN PWR ON		(LAST LVL, -80 to +6dB)

MAIN PWR ON establishes the volume level that will be active in the Main Zone whenever the unit is powered on. When set to LAST LVL, the Main Zone will power on at the last volume level that was active in that zone during the previous operating session.

MUTE LEVEL (FULL, -40dB, -30dB, -20dB, -10dB)

MUTE LEVEL establishes the amount of attenuation that occurs in the Main Zone whenever the Mute button is pressed. When set to FULL, the Main Zone volume level will be fully attenuated.

ZONE PWR ON (LAST LVL, -80 to +6dB)

ZONE PWR ON establishes the volume level that will be active in Zone 2 whenever the unit is powered on. When set to LAST LVL, Zone 2 will power on at the last volume level that was active in that zone during the previous operating session.

REC PWR ON (LAST LVL, -80 to +6dB)

REC PWR ON establishes the volume level that will be active in the Record Zone whenever the unit is powered on. When set to LAST LVL, the Record Zone will power on at the last volume level that was active in that zone during the previous operating session.

3-34