Lexicon SDP-40 manual Dts and dts-ES, Dts-ES 2-CHANNEL, Mode Adjust 2-CHAN

SDP-40

The MODE ADJUST Menu

dts and dts-ES

MODE ADJUST

•The unit will automatically switch between the dts and dts-ES listening modes, activating ES decoding when a dts-ES input type is identified.

dts

•Designed for playback of 5.1-channel dts encoded sources.

•Decodes 5.1 discrete channels from dts encoded input types. The five main channels are full-frequency. The .1 channel, often referred to as the LFE or subwoofer channel, has a limited frequency range of 120Hz.

•Appropriate for dts encoded film sources.

dts-ES

•Designed for playback of 6.1-channel dts-ES encoded sources.

•Decodes 6.1 channels from dts-ES encoded input types. The six main channels are full-frequency. The surround back channel can be either discrete or matrix encoded. The

.1 channel, often referred to as the LFE or subwoofer channel, is filtered above 120Hz.

•Appropriate for dts-ES encoded film sources.

	Default
Parameter	Value	Values
LFE MIX	+0.0dB	-10.0 to +0.0dB
OUTPUT LEVELS	See page 5-17 for more information
CUSTOM	See page 5-17 for more information

An alphabetical listing of parameter descriptions begins on page 5-20.

dts(-ES) 2-CHANNEL

MODE ADJUST 2-CHAN

•Designed for conversion of 5.1 or 6.1-channel dts(-ES) input types to LOGIC7 encoded 2-channel input types.

•Allows 5.1 or 6.1-channel dts(-ES) sources to be listened to through the front left and right channels.

•Reproduces the original 5.1 performance through playback of LOGIC7 listening modes.

•Recommended for recording purposes.

•The unit will automatically activate ES decoding when a dts-ES input type is identified.

	Default
Parameter	Value	Values
CENTER MIX	+0dB	-25 to +25dB
SURROUND MIX	+0dB	-5 to +5dB
CNTR DLY SAMPLES	+0	-127 to +127
MASTER LEVEL	+0dB	-5 to +5db
LFE MIX	+0.0dB	-10.0 to +0.0dB
SUB L/R LVL	+0dB	OFF, -30 to +12dB
CUSTOM	See page 5-17 for more information

An alphabetical listing of parameter descriptions begins on page 5-20.

5-15