Lexicon SDP-40 manual Display Setup ON-SCREEN Display, Status, Position

SDP-40

The SETUP Menu

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS

LOCK OPTIONS

DISPLAY SETUP

ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
A/V SYNC DELAY	OFF
CUSTOM NAME	OFF
EDIT CUSTOM NAME

ON-SCREEN DISPLAY

STATUS	2 SECONDS
POSITION	TOP
FORMAT	NTSC
BACKGROUND	ON
REMOTE STATE	ON

DISPLAY SETUP

ON-SCREEN DISPLAY

SETUP DISPLAYS ON-SCREEN DISPLAY

	Default
Parameter	Value	Values
STATUS	2 SECONDS	ALWAYS ON, 2 SECONDS,
		ALWAYS OFF
POSITION	TOP	TOP, CENTER, BOTTOM
FORMAT	NTSC	NTSC, PAL, SECAM
BACKGROUND	ON	ON, OFF
REMOTE STATE	ON	ON, OFF

STATUS (ALWAYS ON, 2 SECONDS, ALWAYS OFF)

STATUS activates and deactivates the on-screen display, provided the display device is utilizing the MAIN VIDEO OUTPUT labelled 1 (OSD). When set to ALWAYS ON, the on-screen display remains on at all times. When set to 2 SECONDS, the on-screen display will appear for two seconds when the unit receives a command or the input type changes. When set to ALWAYS OFF, the on-screen display remains off at all times.

POSITION (TOP, CENTER, BOTTOM)

POSITION controls the vertical position of the two-line status (see page 1-5) on the display device. When set to TOP, the two-line sta- tus appears near the top of the display device screen. When set to CENTER, the two-line status is centered on the display device screen. This setting is recommended when the top and bottom of the on-screen display appears cropped (not visible). When set to BOTTOM, the two-line status appears near the bottom of the display device screen.

3-31