Lexicon SDP-40 manual Lfe On, Off, Lfe Off

SDP-40

The SETUP Menu

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP SYNTHESIS 7CH SETUP SPEAKER DISTANCES LEVELS CALIBRATION

		R	SR	RR
		80Hz	80Hz	80Hz
		C
		80Hz
	M	L	SL	RL
	SUB
80Hz		80Hz	80Hz	80Hz

CUSTOM SETUP

FRONT L/R	80Hz
CENTER	80Hz
SIDE L/R	80Hz
REAR L/R	80Hz
SUB L/R	MONO
SUB XOVER	80Hz
LFE
OFF

LFE (ON, OFF)

LFE (Low Frequency Effects) activates and deactivates the MAIN AUDIO OUTPUT labelled LFE. Selecting this parameter accesses the pulldown menu pictured above. Use the up and down MENU arrows to switch between the ON and OFF settings. Press the right MENU arrow to select the desired setting. Press the left MENU arrow to close the pulldown menu and return to the CUSTOM SETUP menu.

When the LFE parameter is set to ON, the unit sends the LFE channel to the LFE output. When set to OFF, the unit deactivates the LFE output and sends the LFE channel to the SUBWOOFER L/R outputs. If the SUBWOOFER L/R outputs are set to NONE, the LFE channel is sent to the MAIN AUDIO OUTPUTS with the lowest crossover setting.

For example, LFE is set to OFF, SUBWOOFER L/R is set to NONE, FRONT L/R is set to 40Hz, and the rest of the MAIN AUDIO OUTPUTS are set to 60Hz. The LFE channel will be sent to the FRONT L/R outputs, utilizing the 40Hz crossover point.

3-23