Lexicon SDP-40 manual Main Advanced, ZONE2 Advanced, Component OSD ON, OFF, Video OSD

The SETUP Menu

JBL

MAIN ADVANCED (continued)

SETUP INPUTS DVD1 MAIN ADVANCED

ANALOG BYPASS (continued) (ON, OFF)

When ANALOG BYPASS is set to OFF, the unit routes the analog input signal through analog-to-digital conversion, internal processing, and digital-to-analog conversion. This makes it possible to utilize internal processing, including listening modes, crossovers, and equalization.

Note:

The menu will appear horizontally stretched across the entire screen if the following conditions are met:

•The S-VIDEO OSD 4:3 parameter is set to OFF.

•An anamorphic trigger signal is present.

•The on-screen display is shown on a 16:9 display device.

COMPONENT OSD (ON, OFF)

Neither Zone 2 nor the Record Zone provide multi-channel outputs. If the 5.1-channel analog input is selected for Zone 2 or the Record Zone, only the front left and right (L)/(R) inputs will be available.

S-VIDEO 16:9 (AUTO, OFF)

S-VIDEO 16:9 controls the passage of anamorphic video trigger signals. When set to AUTO, the unit allows anamorphic trigger signals to pass through the S-video switcher. This enables compatible display devices to automatically switch between anamorphic and non-anamorphic display modes. When set to OFF, the unit prevents anamorphic trigger signals from passing through the S-video switcher. This disables compatible display devices from switching between anamorphic and non-anamorphic display modes.

COMPONENT OSD activates and deactivates the on-screen display, provided the display device is utilizing the COMPONENT VIDEO OUTPUT. When set to ON, the COMPONENT VIDEO OUTPUT displays the on-screen menus as a 480i video signal on a full blue-screen background. The component on-screen display includes the two-line status. When set to OFF, the component on- screen display is deactivated. The component on-screen display will be automatically deactivated when the BACKGROUND parameter on the ON-SCREEN DISPLAY menu is set to OFF (see page 3-32).

ZONE2 ADVANCED

SETUP INPUTS DVD1 ZONE2 ADVANCED

Selecting ZONE2 ADVANCED accesses the ZONE 2 ADV menu, which can be used to configure advanced settings in Zone 2.

S-VIDEO OSD 4:3	(ON, OFF)		Default
		Parameter	Value	Values
S-VIDEO OSD 4:3 controls the appearance of the on-screen
		INPUT SELECT	DIGITAL	AUTO, ANALOG, DIGITAL
display. When set to ON, the	on-screen display utilizing the
S-video output is displayed in a 4:3 aspect ratio regardless of the
aspect ratio of the incoming signal. When set to OFF, the on-screen
display utilizing the S-video output is displayed in the same aspect
ratio as the incoming signal.
3-14