Lexicon SDP-40 manual Output Levels, Custom VS Preset, Reset Mode

CUSTOM

CUSTOM VS PRESET PRESS RIGHT V

TO RESTORE MODE

CUSTOM

CUSTOM VS PRESET RESET MODE

CUSTOM

CUSTOM VS PRESET CUSTOM

SDP-40

The MODE ADJUST Menu

OUTPUT LEVELS

MODE ADJUST (LISTENING MODE) OUTPUT LEVELS

The OUTPUT LEVELS menu contains parameters for adjusting CENTER, SIDE L/R, REAR L/R, SUBWOOFER L/R, and LFE output levels on a per-mode basis.

The OUTPUT LEVELS menu is not available for listening modes that do not accommodate multi-channel outputs, such as MONO. For these listening modes, the OUTPUT LEVELS menu option appears as an output-specific parameter, such as CENTER LVL.

	Default
Parameter	Value	Values
CENTER	+0dB	OFF,	-30 to +12dB
SIDE L/R	+0dB	OFF,	-30 to +12dB
REAR L/R	+0dB	OFF,	-30 to +12dB
SUB L/R	+0dB	OFF,	-30 to +12dB
*LFE	+0dB	OFF,	-30 to +12dB

*The LFE parameter is only available for 5.1-channel listening modes.

An alphabetical listing of parameter descriptions begins on page 5-20.

When a SYNTHESIS 7CH SETUP is selected, the LFE parameter will appear on the OUTPUT LEVELS menu for the 5.1 THX SURROUND EX or 5.1 THX and dts(-ES) THX listening modes. This parameter only has an effect when the LFE parameter on the CUSTOM SETUP menu is set to ON (page 3-23).

CUSTOM

MODE ADJUST (LISTENING MODE) CUSTOM

The CUSTOM menu can be used to compare modified listening mode versions to their original, factory-default versions.

CUSTOM VS PRESET

CUSTOM VS PRESET allows comparison listening of the modified and factory-default versions of the selected listening mode. This option is available even when no

modifications have been made to the selected listening mode. But the custom and preset versions of the listening mode will sound the same until modifications are made.

Selecting CUSTOM VS PRESET accesses the pulldown menu pictured at the right. Pressing the up and down MENU arrows toggles between the modified and factory-default versions of the selected listening mode. The message “CUSTOM” appears when the modified version of the listening mode is selected, and the message “PRESET” appears when the factory-default version of the listening mode is selected. Press the left MENU arrow to close the CUSTOM VS PRESET pulldown menu.

RESET MODE

RESET MODE restores the selected listening mode to its factory-default condition. Selecting this option accesses the pulldown menu pictured at the right. Press the right MENU arrow to restore the factory-default

version of the selected listening mode. Press the left MENU arrow to exit the RESET MODE pulldown menu without restoring the selected listening mode to its factory-default settings.

5-17