OWNER'SRESPONSiBiLiTIES
Followthe hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCESCHEDULE
MAINTENANCETASK
PRESSURE WASHER
Chec_Ncieanwater inlet screen
Check high pressure hose
Check detergent hose
Check spray gun and assembly for leaks Purge pump of air and contaminants Prepare pump for storage below 32°F
ENGINE
Check oil bye[
Clean debris
Change engine oil
Service air cleaner
Service spark plug
Service spark arrester
Clean cooling system
Clean combustion chamber
Prepare for storage
OPERATINGiNTERVALS
|
|
| SERVICEDATES |
|
|
| FILL IN DATESAS YOU COMPLETE |
Before | Hours or | REGULARSERVICE | |
Hours or | Hours or |
| |
Each Use I Every 25 | Every 50 | Every 100 Hours |
|
Yearly | Yearly | Yearly |
|
X 1
}(
N
N
}(
See Winter Storz_ge
X
X
X _
X_
X
X
X_
If unit is to remain idle for longer than 30 days,
Cleanif clogged. Replace if perforated or torn.
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Changesooner when operating under dirty or dusty conditions. Replace more often under dirty or dusty conditions,
GENERALRECO 'JMENDATION$
Regular maintenancewill improve the performance and extendthe iife of the pressure washer. Seeany Sears or other quaiified service deaierfor service.
The pressure washer warranty does not cover items that have been subjected to operator abuse or negiigence. To receivefurl vatuefrom the warranty, the operator must maintain pressure washer as instructed in this manual including proper storage as detaiied in Storage.
Some adjustments wiii needto be made periodicaliy to properly maintain your pressure washer.
AtI service and adjustments should be made at least once each season. Follow the requirements in the Maintenance Schedu/echart above.
NOTE:Oncea year you should clean or replace the spark ptug and repiace the air filter. A new spark piug and clean air filter assure proper
ENIi$$i0N CONTROL
Maintenance,replacementor repair of the emission control devices and systems may be performed by any
BEFOREEACHUSE
1.Checkengine oil bvei.
2.Cleandebris.
3.Checkwater inlet screen for damage.
4.Checkhigh pressure hose for leaks.
5.Checkcteaningtank for damage.
6.Checkgun and nozzteextension assembly for leaks.
7.Purge pump of air and contaminants.
PRESSUREWASHERMAINTENANCE
Clean Debris
Daily or before use,clean accumuiated debris from cbaning system. Keepiinkage, spring and controis cban. Keeparea around and behind muffler free from any combustible debris. Inspect cooiing air siots and openings on the pressure washer. Theseopenings must be kept ciean and unobstructed.
Cleaningsystem parts should be kept clean to reduce the risk of overheating and ignition of accumuiated debris.
. Usea damp cioth to wipe exterior surfaces clean.
o Usea soft bdstte brush to loosen caked on dirt, oil, etc.
16