Figure 11 - Turn on the pressure washer by depressing the top half of the switch
(L)marked “I”. The unit will run for a few seconds as it builds up pressure, then will shut off. It will run on demand as the gun trigger is depressed. Turn off the pressure washer by depressing the lower half of the switch marked “0”.
11
YOUR PRESSURE WASHER IS NOW READY TO USE - PLEASE REVIEW THE FOLLOWING FOR DETAILS ON ACCESSORIES APPLICATION.
ACCESSORIES
CAUTION: Before changing accessories, turn unit off, pull trigger to release pressure, and activate safety catch.
•ADJUSTABLE FAN WAND
1.) Insert the fan wand (D) into the gun wand (H) by pushing and rotating until the two parts are locked as shown in Figure A.
A |
2.) To obtain maximum pressure, rotate the fan wand nozzle in a clockwise direction as shown in FIgure B. This narrow stream results in deeper cleaning in a concentrated area. For a wider fan pattern rotate the fan wand nozzle in the counterclockwise direction. The wider fan pattern reduces the risk of surface
damage and allows for cleaning large surface areas quickly.
B |
3.) To remove, press fan wand into gun wand and twist as shown in Figure C.
C |
•TURBO NOZZLE
1.) Insert the turbo nozzle wand (C) into the gun wand (H) by pushing and rotating until the two parts are locked as shown in Figure D.
D |
2.) There is no adjustment required with the turbo nozzle.
3.) To remove, press nozzle wand into gun wand and twist as shown in Figure
E. |
E |
•DETERGENT APPLICATOR
Follow manufacturer’s label directions for mixing correct concentrations of soap and detergents.
To use the applicator:
1.) Unscrew top of detergent applicator
6