1 Overview
Dear Customer
Thank you for purchasing our Pocket Projector.
We hope you enjoy your device and its many functions!
General Safety Information
Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indi- cated.
Setting Up the Device
Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data.
In the event that the device becomes too hot, or if you see smoke coming from the device, you must immedi- ately disconnect the device from the USB socket. Have your device examined by trained professionals at a tech- nical service location. To prevent the spread of fire, open flames should be kept away from the device.
Do not plug in the device in moist rooms. Never touch the mains cable or the mains connection with wet hands.
Under the following conditions, a layer of moisture can appear inside the device which can lead to malfunctions:
·if the device is moved from a cold to a warm area;
·after a cold room is heated;
·when this device is placed in a damp room.
Proceed as follows to avoid any moisture
1Seal this device in a plastic bag before moving it to another room, in order for it to adapt to room con- ditions.
2Wait one to two hours before you take the device out of the plastic bag.
The device should not be used in a very dusty environ- ment. Dust particles and other foreign objects may damage the unit.
Do not expose the device to extreme vibrations. It may damage the internal components.
Do not allow children to handle the device without supervision. The packing materials should be kept out of the hands of children.
Repairs
Do not make any repairs to the device yourself. Improper maintenance can result in injuries or damage to the device. Only have your device repaired by an authorised service centre.
Do not remove the type label from your device; this would void the warranty.
High Power LED
This device is equipped with an high power LED (Light Emitting Diode), which emits very bright light. Do not stare directly into the projector lens to avoid eyes injury or irritations.
Top of the Device
‚Focus setting
ƒMini USB connection
Bottom of the Device
„Tripod socket
…
EN
Overview · Dear Customer | 5 |