Cisco Systems ONS 15600 SDH manual Tools, 18-10

Chapter 18 DLPs F300 to F399

DLP- F308 Delete a Node from the Current Session or Login Group

Figure 18-2 Login Node Group

Laptop PC

IP Address 192.168.106.100

LAN/WAN (Ethernet)

Node 1	Node 4	Node 5
IP Address	IP Address	IP Address
192.168.106.143	192.168.105.119	192.168.104.109

Two node ring

Three node ring Single

Node 2	Node 3	Node 6
		IP Address
		192.168.103.199

83116

Step 8 Return to your originating procedure (NTP).

DLP-F308 Delete a Node from the Current Session or Login Group

Purpose	This task removes a node from the current CTC session or login node
	group. To remove a node from a login node group that is not the current
	one, see “DLP-F312 Delete a Node from a Specified Login Node Group”
	task on page 18-13.
Tools	None
Prerequisite Procedures	DLP-F181 Log into CTC, page 16-34
Required/As Needed	As needed
Onsite/Remote	Onsite or remote
Security Level	Provisioning or higher

Step 1 From the View menu, choose Go to Network View.

Step 2 Click the node that you want to delete.

Step 3 From the File menu, click Delete Selected Node.

After a few seconds, the node disappears from the network view map.

Step 4 Return to your originating procedure (NTP).

	Cisco ONS 15600 SDH Procedure Guide, R8.0
18-10	October 2007