XP SBC HC
Installation | Audio Connections |
Headphone battery replacement
IMPORTANT
Use only rechargeable LR03/AAA NiMH batteries (preferably Philips).
Do not use NiCd batteries or alkaline batteries as these may damage your FM wireless system!
1Open the headphone’s battery compartment.
2Take out the batteries and dispose of them properly.
3Insert new batteries. Only use LR03/AAA NiMH batteries (preferably Philips).
4Make sure the batteries are correctly inserted as indicated by the engraved symbols in the battery compartment.
5Close the battery compartment.
IMPORTANT
Before using the FM headphone for the first time, please ensure that the batteries are fully charged for about 16 hours.This will guarantee a longer operating lifetime of the batteries.
Connecting the FM transmitter to a headphone output of an audio source (figure 4)
1Connect the 3.5mm stereo plug of the stereo audio cable to the headphone output of an audio source, such as TV, HiFi or PC.
–In case your audio source has a 6.3mm headphone output, use the supplied 3.5mm to 6.3 mm stereo adapter plug.
2Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal.
3Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter.
4To tune, turn the tuning knob until the signal is at its clearest and the tuning indicator will light up.
5Adjust the volume to the desired level with the headphone volume control.
Basic operation
When the FM transmitter is connected to a headphone output of an audio source.
1Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal.
2Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter.
3To tune, turn the tuning knob until the signal is at its clearest and the tuning indicator will light up.
4Adjust the volume to the desired level with the headphone volume control.
English
7