Q-Logic 2300 series manual Tables 3-3and 3-4define the QCP2340/2342 specifications

Q

3 – QCP2340/2342 Specifications

3.4.6

Setting and Viewing the Fibre Channel Data Rate

Use the show-data-rate command to view the current QCP2340/2342 Fibre Channel data rate. For example:

ok show-data-rate

Current HBA data rate: One Gigabit rate

Use the set-data-rate command to change the current QCP2340/2342 Fibre Channel data rate. For example:

ok 1 set-data-rate

Calculating NVRAM checksum, please wait...

Current HBA data rate: Two Gigabit rate

Table 3-2lists the values to enter and their corresponding data rates.

Table 3-2. Fibre Channel Data Rates

Value	Data Rate
0	One gigabit
1	Two gigabits
2	Auto-negotiated rate

3.5

Specifications

Tables 3-3and 3-4define the QCP2340/2342 specifications.

Table 3-3. QCP2340/2342 Board Operating Environment

Environment	Minimum	Maximum
Operating temperature	0°C/32°F	55°C/131°F
Storage temperature	–20°C/–4°F	70°C/158°F
Relative humidity (noncondensing)	10%	90%
Storage humidity (noncondensing)	5%	95%

Table 3-4. QCP2340/2342 Board Specifications

Type			Specification
Host bus	Conforms to PCI Local Bus Specification, revision 2.1
Fibre Channel	Bus type: fibre optic media
specifications	Bus transfer rate:	200	MBps maximum at half duplex
		400	MBps maximum at full duplex
	Interface chip:	ISP2312
Central	Single-chip design that includes a RISC processor, Fibre Channel
processing	protocol manager, DMA controller, and 2-Gb transceivers
unit (CPU)

CF2351102-00 F 3-13