Q-Logic 2300 series manual EMI and EMC Requirements, Dma

3 – QCP2340/2342 Label

Q

Table 3-4. QCP2340/2342 Board Specifications (Continued)

Type	Specification
RAM	256K bytes of synchronous SRAM (SSRAM) per RISC
NVRAM	256 bytes, field programmable
Flash	512K bytes of flash ROM, field programmable
On-board	Three independent DMA channels: two data and one command.
DMA	Integrated frame buffer FIFOs (6K-byte receive and 4K-byte transmit)
	for each data channel.
Connectors	LC-style connector that supports non-OFC, multimode fibre optic cabling
	using 2⋅5 fibre optic transceiver module.
Form factor	16.0cm ⋅ 10.0cm (6.3" ⋅ 3.9")
Operating	Less than 15 watts
power

3.6

Label

The transceiver on the QCP2340/2342 HBA is a Class I laser product. It complies with IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated under recommended operating conditions.

CLASS I LASER PRODUCT

3.7

Agency Certification

The following sections contain a summary of the EMC/EMI test specifications performed on the QCP2340/2342 (CF2310402) to comply with radiated emission, radiated immunity, and product safety standards.

3.7.1

EMI and EMC Requirements

The QCP2340/2342 conforms to the following requirements:

■FCC Part 15, Class A

❑	Radiated Emission	Class A
❑	Conducted Emission	Class A

■ICES-003, Class A, Industry Canada

■89/336/EEC EMC Directive CE

3-14 CF2351102-00 F