6 – Solaris SPARC Driver Installation
Installing the Solaris SPARC Driver from the QLogic Web Site
Q
9.You are prompted to select the directory where the driver will be installed. For example:
Processing package instance <QLA2300> from </tmpdir/qla2300_pkg>
QLogic QLA2300 driver (sparc) Solaris, Rev=X.XX
Copyright (c)
Where do you want the driver object installed (default=/kernel/drv):
10.Press ENTER to accept the default.
11.The pkgadd program performs a series of checks, then posts a script warning and asks whether to continue the installation. For example:
Using </> as the package base directory.
##Processing package information.
##Processing system information.
##Verifying disk space requirements.
##Checking for conflicts with packages already installed.
##Checking for setuid/setgid programs.
This package contains scripts which will be executed with
Do you want to continue with the installation of <QLA2300> [y,n,?]
12.Type y and press ENTER to continue the driver installation. The pkgadd program notifies you when the driver installation is complete. For example:
Installing QLogic QLA2300 driver as <QLA2300>
##Installing part 1 of 1. /kernel/drv/q2ip /kernel/drv/q2ip.conf /kernel/drv/q2ip_v9 /kernel/drv/qla2300 /kernel/drv/qla2300.conf /kernel/drv/qla2300_v9
[ verifying class <none> ]
##Executing postinstall script
Installation of <QLA2300> was successful.
If you are not installing an SDM API library, continue with step 15.