Q-Logic 2300 series manual You are prompted to select a driver package. For example

Q

6 – Solaris SPARC Driver Installation Installing the Solaris SPARC Driver from the QLogic Web Site

1.Log on to the system as a superuser.

2.Download the driver package from the QLogic Web site (www.qlogic.com) to a directory on the Solaris machine’s hard disk.

3.At the command prompt, change the directory (cd) to the directory where the file was downloaded.

4.At the command prompt, type:

uncompress ./qla2300_pkg.Z

5.Step 4 produces a file in the same directory called qla2300_pkg.

6.At the command prompt in the directory where the file was uncompressed, type:

pkgadd -d ./qla2300_pkg

7. You are prompted to select a driver package. For example:

The following packages are available:

1 QLA2300 QLogic QLA2300 driver (sparc) Solaris, Rev=X.XX

2	QLSDMLIB	QLogic	SDM	Library
		(sparc) Solaris			7-8-9, Rev=X.XX
3	QLSDMLIB6	QLogic	SDM	Library
		(sparc) Solaris			2.6, Rev=X.XX

Select package(s) you wish to process (or ’all’ to process all packages). (default: all) [?,??,q]:

NOTE: The revision number, X.XX, indicates the version of the driver.

8.Type the number associated with the Solaris SPARC version on your system. Separate the numbers by pressing the SPACEBAR.

a.Type 1 to install the driver package.

b.If you are installing the storage networking industry association (SNIA) application programming interface (API) libraries, type 2 or 3.

For example, type the following to install the driver and SDM library for a Solaris 8 system:

Select package(s) you wish to process (or ’all’ to process all packages). (default: all) [?,??,q]: 1 2

Press ENTER to continue.

CF2351102-00 F 6-3