Ampro Corporation 700 manual Chapter Bios Setup

Chapter 4 BIOS Setup

♦Assign DMA 5 – [Disabled] or [Enabled]

•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.

•If another device in the system is using this DMA channel, then this field should be set to [Disabled].

♦Assign DMA 6 – [Disabled] or [Enabled]

•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.

•If another device in the system is using this DMA channel, then this field should be set to [Disabled].

♦Assign DMA 7 – [Disabled] or [Enabled]

•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.

•If another device in the system is using this DMA channel, then this field should be set to [Disabled].

ReadyBoard 700 Reference Manual 69