Chapter 4 |
|
| BIOS Setup |
♦ | Assign IRQ 11 | – [Disabled] or [Enabled] | (Typically ISA Bridge/Native IDE) |
| • If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play | ||
| adapter. |
|
|
| • If another device in the system is using this IRQ, then this field should be set to | ||
| [Disabled]. |
|
|
♦ | Assign IRQ 12 | – [Disabled] or [Enabled] | (Typically PS/2 Mouse) |
•If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
•If another device in the system is using this IRQ, then this field should be set to [Disabled].
♦ Assign IRQ 14 – [Disabled] or [Enabled] (Typically Hard Disk)
•If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
•If another device in the system is using this IRQ, then this field should be set to [Disabled].
♦ Assign IRQ 15 – [Disabled] or [Enabled] (Typically Hard Disk)
•If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
•If another device in the system is using this IRQ, then this field should be set to [Disabled].
♦Assign DMA 0 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
♦Assign DMA 1 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
♦Assign DMA 2 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
♦Assign DMA 3 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
68 | Reference Manual | ReadyBoard 700 |