Ampro Corporation 700 manual Watchdog timer WDT Table notes

Appendix B LAN Boot Option

Celeron CPUs		6, 20
CompactFlash socket (1)		7, 35
console redirection		51
Ethernet interfaces (2)		8, 44
Ethernet port LEDs		14
external battery		8
flat panel configurations		66
floppy disk drives (2)		7, 37
GPIO feature		51
heatsinks		17
I/O address map		22
IDE devices (3)		7, 33
infrared (IrDA) interface		7, 50
input power (+5V)		53
IRQ assignments		21
jumpers, onboard		14
LAN Boot (optional feature)	63, 75
LAN Boot BIOS configuration	63, 76
Lithium Battery		50
memory map		21
Oops! jumper (BIOS recovery)		50
parallel port (1)		7, 37
PC/104 bus		6, 28
PC/104-Plus bus		6, 23
PC133/PC100 memory		20
Pentium III CPU		6, 20
Power On/IDE Activity LEDs		14
PS/2 keyboard interface		7, 49
PS/2 Keyboard/mouse over-current fuse (1)		......8
PS/2 mouse interface		8, 49
Real-time clock (RTC)		8, 50
RS485/RS422 configuration		39
serial console		8, 51
serial ports (4)		7, 39
splash screen customization		70
thermal sensor		8, 51

USB boot device	58, 59, 63
USB ports (4)		7, 43
video interfaces (3)		8, 46
voltage sensor		8
watchdog timer (WDT)	8, 52, 63
table notes
PC/104-Plus input and output codes		27
terminal emulation software
console redirection		51
serial console		51
thermal cooling
processor requirements		17
thermal sensor
supported features		51
USB Boot
default setting (Disabled)		63
USB floppy drive settings		59
USB ports
connector pin outs		43
Utility Interface
connector pin outs		49
Video interface
connector pin outs		46
watchdog timer (WDT)
2 to 255 sec interval		52
functions		52
source code examples		52
web sites
infrared specifications		50
LAN boot information		75
major chip specifications		2
PXE specifications		75
reference material		1
weight		16
Wired for Management (WfM) specification		...... 75

ReadyBoard 700 Reference Manual 81