Ampro Corporation 700 manual Chapter Hardware, Overview

Chapter 3 Hardware

Overview

This chapter discusses the chips and features of the connectors in the following order:

•CPU (U4)

•Memory (DIMM1)

•PC/104-Plus (J12A, B, C, D)

•PC/104 (J13A & B, J14C & D)

•IDE Interfaces (J22)

•CompactFlash Adapter (J23)

•Floppy /Parallel Interface (J20)

•Serial Interfaces (J5A/B, J3A/B)

•USB (J15A/B, J21A/B)

•Ethernet Interfaces (J10, J11)

•Audio Interface (J19)

•Video Interfaces (J8, J9, J7)

•Miscellaneous

♦Utility Interfaces (J18)

♦Reset Switch (SW1)

♦Keyboard/Mouse (J16)

♦Infrared (IrDA) Port (J17)

♦Real Time Clock (RTC)

♦Oops! Jumper (BIOS Recovery)

♦User GPIO signals (J2)

♦Temperature Monitoring

♦Serial Console

♦Watchdog timer

•Power Interface (J4, J6)

NOTE	Ampro Computers, Inc. only supports the features/options tested and listed in this
	manual. The main integrated circuits (chips) used in the ReadyBoard 700 may
	provide more features or options than are listed for the ReadyBoard 700, but
	some of these chip features/options are not supported on the board and may not
	function as specified in the chip documentation.

ReadyBoard 700 Reference Manual 19