Ampro Corporation 700 manual Bios Configuration Screen, Date & Time, Drive Assignments

Chapter 4 BIOS Setup

BIOS Configuration Screen

Ampro Setup Utility for ReadyBoard 700, SWxxxxxx

[Date & Time]
> Date	08 Oct 2004<
Time	10:24:34
[Drive Assignment]	1.44 MB, 3.5”
Drive A
Drive B	(none)
Drive C	HDD on Pri Master
Drive D	(none)
Drive E	(none)
Drive F	(none)
Drive G	(none)
[Boot Order]	Drive A:
Boot 1st
Boot 2nd	Drive C:
Boot 3rd	CDROM
Boot 4th	(none)
Boot 5th	(none)

Help for Date

The Date & Time fields are updated in real-time.

When you make a change, the CMOS is updated immediately.

Any changes made to Date & Time fields will be saved even if you discard changes at exit.

Use Arrow keys to change menu item, use Page Up/Down to modify. Esc to exit.

(C) Copyright 2004, Ampro Computers, Inc. - http://www.ampro.com

Figure 4-2. Modifying Setup Parameters Screen

•Date & Time

♦DATE (mm:dd:yyyy) – This requires the alpha-numeric entry of the calendar month (3), day of the month (2), and all 4 digits of the year, indicating the century plus year (08 Oct 2004).

♦Time (hh:mm:ss) – This requires 24 hour Clock setting in hours, minutes, and seconds

•Drive Assignments

♦Drive A – [none], [360kB, 5.25”], [1.2MB, 5.25”], [720kB, 3.5”], [1.44MB, 3.5”], [2.88MB, 3.5”], or [USB Floppy]

NOTE	If USB Boot Support is [Disabled], the USB Floppy selections are invalid
	and Drive B must be set to [none]. See Table 4-2 Floppy Drive Setting.

♦Drive B – [none], [360kB, 5.25”], [1.2MB, 5.25”], [720kB, 3.5”], [1.44MB, 3.5”], [2.88MB, 3.5”], or [USB Floppy]

NOTE	If a CompactFlash device is used in the system, it is always
	configured as [HDD/CF Sec Master or Slave] as Drive C or D.

♦Drive C – [none], [HDD on Pri Master], [CDROM on Pri Master], [HDD on Pri Slave], [CDROM on Pri Slave], [HDD/CF on Sec Master], [CDROM on Sec Master], [HDD/CF on Sec Slave], [CDROM on Sec Slave], [USB HDD], or [USB CDROM]

NOTE	The BIOS does not support a break in the drive order, that is, Drive C
	can not be listed as [none] when the boot device is Drive D.

♦Drive D – [none], [HDD on Pri Master], [CDROM on Pri Master], [HDD on Pri Slave], [CDROM on Pri Slave], [HDD/CF on Sec Master], [CDROM on Sec Master], [HDD/CF on Sec Slave], [CDROM on Sec Slave], [USB HDD], or [USB CDROM]

58 Reference Manual ReadyBoard 700