Mitsubishi Electronics Pro 930SB user manual Declaration of Conformity

Page 2

FCC Information

1.Use the attached specified cables with the Diamond Pro 930SB colour monitor so as not to interfere with radio and television reception.

(1)Please use the supplied power cord or equivalent to ensure FCC compliance.

(2)Shielded captive type signal cable.

Use of other cables and adapters may cause interference with radio and television reception.

2.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult your dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: ”How to Identify and Resolve Radio-TV Interference Prob- lems.“ This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.

DECLARATION OF CONFORMITY

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

U.S. Responsible Party:

NEC-Mitsubishi Electronics Display of America, Inc.

Address:

1250 N. Arlington Heights Road

 

Itasca, Illinois 60143

Tel.No.:

(630) 467-3000

 

 

Type of Product:

Computer Monitor

Equipment Classification:

Class B Peripheral

Models:

N2901

We hereby declare that the equipment specified above

conforms to the technical standards as specified in the FCC Rules.

IBM is registered trademark of International Business Machines Corporation. Apple and Macintosh are registered trademarks of Apple Computer Inc. Microsoft and Windows are registered trademarks of the Microsoft Corporation.

ENERGYSTAR is a U.S. registered trademark. All other trademarks or registered trademarks are property of their respective owners.

2

Image 2
Contents Diamond Pro 930SB Declaration of Conformity Kullanécé Klavuzu Controls ContentsQuick Start Color Control System IPM System Off ModeSize and Position Controls ToolsRecommended use Safety Precautions and MaintenanceCleaning Your Monitor ErgonomicsOvládací prvky ObsahRychlý start Ovládací prvky pokračování Čištění monitoru Provozní pokynyBezpečnostní opatření a údržba ErgonomikaBedienelemente InhaltKurzanleitung Gehen Sie folgendermaßen vor, um den Diamond Pro 930SBGrößen- und Positionseinstellung Bedienelemente FortsetzungHelligkeit-/Kontrast-Steuerungen Color Control System FarbsteuerungssystemReinigen des Monitors EinsatzempfehlungenSicherheitsvorkehrungen und Pflege ErgonomieΠροϊόν Energystar Γρήγορη ΕκκίνησηΣχήµα a Σχήµα B ΠΡΟΕΙ∆ΟΠΟΙΗΣΗΠλήκτρα ελέγχου Μεγέθους και Θέσης Πλήκτρα ΕλέγχουΠλήκτρα ελέγχου Φωτεινότητας/Αντίθεσης Color Control System Σύστηµα Ελέγχου ΧρωµάτωνΠληροφορίες Πλήκτρα ελέγχου συνέχειαΕργαλεία Εργονοµία Συνιστώµενη ΧρήσηΚαθαρισµός της Οθόνης Σας Controles ContenidoInicio rápido Color Control System Sistema de control del color Controles de brillo/contrasteControles de tamaño y posición Controles de geometríaPeligro Medidas de seguridad y mantenimientoLimpieza del monitor ErgonomíaMise en marche rapide CommandesContenu de la livraison Menu principal Sous-menuCommandes suite Conseils d’utilisation Nettoyage de votre moniteurControlli ContenutoGuida rapida Completo su CD ROMControlli segue Pulitura del monitor Raccomandazioni per l’usoPrecauzioni di sicurezza e manutenzione ErgonomiaVolg de onderstaande instructies om de InhoudSnel aan de slag Diamond Pro 930SB monitor op uw computersysteemGrootte en positie BesturingselementenHelderheid/contrast Color Control System KleurenbeheersysteemInformatie Besturingselementen vervolgHulpmiddelen De monitor reinigen Aanbevolen gebruikVeiligheidsmaatregelen en onderhoud Przyciski Zawartość opakowaniaPodłączenie monitora Aby podłączyć monitor Diamond Pro 930SB do TwojegoColor Control System Układ sterowania kolorami Regulacja jasności/kontrastuRegulacja rozmiaru Size i pozycji Position Regulacja geometriiZasady bezpieczeństwa i utrzymania Zalecenia eksploatacyjneInformacje Konserwacja monitoraWidok gniazda od strony wtyczki Zalecenia eksploatacyjne ciąg dalszyUwagi dotyczące zasilania monitora Wyrób EnergystarСодержание Краткое руководство по началу работыРегулировка размера и положения Элементы управленияРегулировка яркости/контрастности Color Control System Система управления цветомИнформация Элементы управления продолжениеИнструменты IPM Режим отключения системыЭгрономика Рекомендации по эксплуатацииОчистка монитора Установите монитор так, чтобыÞekil a Þekil B Kontroller devam Kullaným klavuzuna bakýnTaþýrken dikkatli olun. Ambalajý taþýma için saklayýn Ayýrmanýn birincil yoludur. Monitör kolaycaEriþilebilen bir prize yakýn olarak kurulmalýdýr Page Printed on recycling paper 15501401