Contents, Quick Start, Controls | Mitsubishi Electronics Pro 930SB

English

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIK SHOCK • DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

CDROM	Power Cord

Captive Signal Cable

User’s manual

Sales Office List

Diamond Pro 930SB monitor box* should contain the following:

•Diamond Pro 930SB Monitor with tilt/swivel base

•Power cord

•Captive Signal Cable

•User ’s manual

•Sales Office List

•CD ROM – Includes complete User’s Manual in PDF format and Windows related files (INF file and colour profile). To see the complete User’s Manual, Acrobat Reader 4.0 must be installed at your PC.

*Remember to save your original box and packing material to transport or ship the monitor.

Quick Start

Power Outlet

Power

Cord

15-pin mini D-SUB

Figure A

Figure B

Power Button

To attach the Diamond Pro 930SB monitor to your system, follow these instructions:

1.Turn off the power to your computer and Diamond Pro 930SB monitor.

2.If necessary, install the display card. For more information, refer to the display card manual.

3.For PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector for the display card in your system (Figure A). Tighten all screws.

4.Connect one end of the power cord to the Diamond Pro 930SB monitor and the other end to the power outlet (Figure A).

5.Turn on the monitor (Figure B) and the computer.

6.The Windows 95/98/2000/Me/XP INF file for your monitor can be found on the CD-ROM, delivered with the monitor.

7.This completes the installation.

NOTE: If you need more information, please refer to complete User's Manual in CD ROM.

Controls				Main Menu	Sub-Menu
OSM (On-Screen Manager) control buttons on the front of the				each SB Mode is adjusted by appropriate color
OSM (On-Screen Manager) control buttons on the front of the				control except for the sRGB mode whose color
monitor function as follows:				setting cannot be adjusted. When the unit is turned
To access OSM press any of the control buttons (EXIT, ,			, –, +).	off, it will reset to SB off mode.
To access OSM press any of the control buttons (EXIT, ,			, –, +).	Super Bright Mode OFF: for text based images
				Super Bright Mode OFF: for text based images
	Main Menu	Sub-Menu		(normal use)
	Main Menu	Sub-Menu		Super Bright Mode-1 ON: for images
EXIT	Exits the OSM menu. Exits to the OSM con-			Super Bright Mode-1 ON: for images
		trols main menu.		Super bright Mode-2 ON: for moving image such
	Note: Deactivates the OSM menu and activates the OSM			as DVD movies
	menu when the OSM is turned off.		RESET	Resets all the controls	Resets the highlighted
CONTROL	Moves the highlighted Moves the highlighted			within the highlighted menu	control to the factory
/	area left/right to select	area left/right to select		to the factory setting.	setting.
	one of the sub-menus.	one of the controls.		Note: When RESET is pressed in the main and sub-

	Note: Deactivates the OSM menu and to adjust Bright-	menu, a warning window will appear allowing
		you to cancel the reset function.
	ness with Hot key set “ON”

CONTROL	Has no function.	Moves the bar in the - or
–/+		+ direction to decrease
		or increase the adjust-
		ment.
	Note: Deactivates the OSM menu and to adjust Contrast
	with Hot key set “ON”
SELECT/	Enters sub-menu.	Has no function.

SBMODE

Note: When the OSM is off, it will act as the SuperBright (SB) function key. User can select between SB MODE OFF, SB MODE1, and SB MODE2. The first time this key is pressed, the current SB Mode is indicated. Within a 3 second window, if this key is selected again, the SB MODE will change to the next SB MODE. For example, the current mode is SB MODE OFF, the key is pressed twice within a 3 second time frame, the SB MODE will change to SB MODE1 and so on. The color temperature at

When Hot key function is set to “ON”, accessing the OSD is only possible with the “EXIT” button.

Brightness/Contrast Controls

Brightness: Adjusts the overall image and background screen brightness.

Contrast: Adjusts the image brightness in relation to the background.

Degauss: Eliminates the buildup of stray magnetic fields which alter the correct scan of the electron beams and affect the purity of the screen colours, focus and convergence. When activated, your screen image will jump and waver a bit as the screen is demagnetized.

Caution: Please allow a minimum of 20 minutes to elapse between uses of the Degauss Control.