When installing adjusting/setting the unit

Installing the Projector

Effective Range and Distance of the Remote Control Unit

The remote control unit can be used as either a wireless remote control unit or a wired one.

■Using as a wireless remote control unit

Aim the remote control unit toward the remote sensor on the front or the rear of the projector.

The operable distance of the remote control unit is about 10 m for direct reception. The remote control unit can be used by having it reflected on the screen. In this case, the total distance of “A+B” should be about 10 m or less. The operable angles of the remote control unit are 15° right and left, and 15° up and down.

Screen

15˚

Projector	15˚
A	15˚
	15˚
	B
No.
51931	Remote control unit

1-11

Installing the Projector

Setting the Position Selecting Screw for Ceiling Mounting

When using the projector in an upside-down, ceiling-mounted position (inverted top-to-bottom and right-to-left), the “position selecting screw for ceiling mounting” must be turned to switch to ceiling mounting.

This will correct variance in color images (shading), which otherwise would occur in ceiling mounting.

To revert to normal desktop setting, turn the “position selecting screw for ceiling mounting” back to the initial position (fac tory- shipped).

When using the projector in an upside-down, ceiling-mounted position:

Turn the “position selecting screw for ceiling mounting” fully counterclockwise (until it is turning idly).

To again use the projector in a normal desktop setting:

Turn the “position selecting screw for ceiling mounting” fully clockwise (until it firmly tightens).

For normal desktop mounting:

Turn the screw clockwise.

For upside-down, ceiling-mounting:

Turn the screw counterclockwise.

CAUTIONS

•To ceiling-mount and adjust the projector, special expertise and technique are necessary. Be sure to ask your dealer or a specialist to perform this work. •To turn the “position selecting screw for ceiling mounting”, use a Phillips screwdriver with a 30-mm or longer shank.

The screw is located in the hole shown in the illustration.

Position selecting screw for ceiling mounting

Note

•When using the projector in a ceiling-mounted position, you should reverse the projected image by changing the settings of Right Left rev. and Top Bottom inv. menus. For details, refer to page 54. You can also change these settings without receiving a video signal. In this case, refer to “Menu Transition Diagram in No signal Menu Mode” on page 38.

When installing (adjusting/setting) the unit

• When using “Top Bottom inv.” on the “Options” menu, reset the unit by following the procedure below.

•This reset procedure must be performed before operating the unit.

1.Change the “Top Bottom inv.” Setting on the “Options” menu.

2.Press the OPERATE button to enter the unit into the stand-by mode.

3.Press the OPERATE button again to turn on the unit.

•Adjust the focus after projecting a picture for 30 minutes or longer.

ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH

DLA-G150CLU DLA-G150CLE

DLA-G150CLU, DLA-G150CLE specifications

The JVC DLA-G150CLU and DLA-G150CLE projectors represent the pinnacle of home cinema and professional presentations, offering exceptional picture quality and advanced technological features. Both models are designed to deliver an immersive viewing experience, leveraging JVC’s years of expertise in projection technology.

These projectors incorporate JVC’s renowned D-ILA (Direct-drive Image Light Amplification) technology. This innovative system utilizes liquid crystal on silicon to achieve stunning color accuracy and contrast. The DLA-G150CLU and DLA-G150CLE boast an impressive native resolution of 1920x1080, allowing for incredibly detailed images that are perfect for both high-definition films and intricate graphics. The contrast ratio of these projectors reaches up to 20,000:1, making dark scenes richer and more dynamic while ensuring bright areas remain vivid without washing out.

Color reproduction is another strong point of the JVC DLA-G150 series, featuring an expansive color gamut that adheres closely to industry standards. The projectors utilize a dual-lamp system, allowing for increased brightness levels of up to 2500 lumens, which ensures clear visibility even in well-lit environments. This feature is particularly beneficial for presentations in conference rooms or larger venues where ambient light may compromise image quality.

Both the DLA-G150CLU and DLA-G150CLE support a wide range of connectivity options, including HDMI and RS-232 ports, making them versatile for various setups. This connectivity is further enhanced by an intuitive on-screen menu system, allowing users to easily adjust settings and calibrate the projector for optimal performance.

For those who value flexibility, the JVC DLA-G150 projectors come with lens shift capabilities, enabling vertical and horizontal adjustments. This feature allows users to position the projector without compromising image quality, catering to different installation environments.

In conclusion, the JVC DLA-G150CLU and DLA-G150CLE projectors embody the perfect blend of advanced technology and user-friendly features. Whether used for home entertainment or professional applications, they offer unparalleled performance, making them an excellent choice for anyone seeking high-quality projection solutions.