JVC DLA-G150CLE Phase Flickering or dim picture image can be adjusted to, Options → Refer to

1-62

Menu Operations

■Menu Transition Diagram in PC Menu Mode

Main menu in PC Menu ModeSubmenus in PC Menu Mode

Press 5/∞ to select an item.			Press 5/∞ to select an item.		Press 2/3 to select Yes or No.
					Then, press ENTER to execute.
			Press 2/3 to set or adjust the value.
Menu					Image adj.
Image adj.	Contrast	3 or
Set up			Image adj.	EXIT
	Brightness	ENTER			All reset?
Color temp.	Sharpness		Contrast	12
Options	All reset			ENTER	Yes	No
		EXIT	Brightness	12
Language			Sharpness	1 2 3 4 5
Information			All reset	ENTER

Menu Operations

■Quick Reference Guide for PC Menu Mode

Main Menu in PC Menu Mode (While receiving computer-related signals)

Image adj. → (Refer to page 49)

	Contrast:	Contrast of the picture image being projected can be adjusted. (–30 to +30, 0*)
	Brightness:	Brightness of the picture image being projected can be adjusted. (–30 to +30, 0*)
	Sharpness:	Adjust the outline of letters etc. (1 / 2 / 3 / 4 / 5, 3*)
	All reset:	Resets above items to the factory set values.
Set up		Yes / No
	Tracking:	The lateral size and display area of picture image can be adjusted. (–128 to +127)
		→ (Refer to page 47)	→ (Refer to page 47)
	Phase:	Flickering or dim picture image can be adjusted. (0 to 31)

DLA-G150CLU DLA-G150CLE

5
5			∞
	Menu
	Image adj.	Tracking
	Set up	Phase
	Color temp.
		Position
	Options
	Language	Resize
	Information	Clamp

					Press ENTER to select an item.
Press 5/∞ to select an item.					Press 5/∞ / 2/3 to move the
					video screen/menu position.
Press 2/3 to set or adjust the value.
					Position
3 or	Set up 1
	Tracking		123		ENTER
ENTER Phase
			12		Disp.Posi.	Menu
	Position		ENTER		12,12	ENTER
EXIT	Resize	1:1	Panel	Aspect	EXIT
	Clamp	ST		BP

	Position:		Video screen position and menu position can be adjusted.		→ (Refer to page 51)
		Disp. Posi. / Menu
	Resize:		The relationship between the number of pixels (resolution) and the screen can be
				selected. → (Refer to page 53)
		“1:1”:		Picture image is projected with its original size.
		Panel:		Picture image is enlarged to the full size.
		Aspect*:		Picture image is enlarged while maintaining the original aspect ratio.
	Clamp:		Selectable clamp position. Normally, set to “BP”. ST / BP*
Color temp.
	Color temp.:			Adjustable color temperature, Low/Middle* /High.

5	∞
Menu
Image adj.
Set up	Color temp.
	RED
Color temp.
Options	GREEN
Language	BLUE
Information	All reset

Set up 1

Position		ENTER
Resize	1:1	Panel	Aspect

Press 5/∞ to select an item.

Press 2/3 to set or adjust the value.

	Color temp.
3 or	Color temp.	Low Middle High	EXIT
ENTER	RED	123
	GREEN	123
EXIT	BLUE	123
	All reset	ENTER

ENTER

Press 2/3 to select Yes or No. Then, press ENTER to execute.

Color temp.

All reset?

YesNo

			Will be adjusted to correct reddish or blueish image.
	RED:		Adjusts the red level. (o to 255, the adjustable range varies depending on signals)
	GREEN:		Adjusts the green level. (o to 255, the adjustable range varies depending on signals)
	BLUE:		Adjusts the blue level. (o to 255, the adjustable range varies depending on signals)
	All-reset:		Reset above items to the factory set values.
		Yes/No
Options → (Refer to page 54)
Options 1
	Menu display:		15sec* (Menu disappears in 15 seconds.) / ON (Menu stays on.)
	Line display:		5sec* (Line display such as “PC1” or “PC2” appears on top right of the screen for 5
			seconds when the VIDEO or PC button is pressed.) / OFF (Line display does not

No

5 ∞

Press 5/∞ to select an item.

Press 2/3 to set or adjust the value.

appear.)

Lamp time display:

.51931

	Menu
	Image adj.		Menu display
	Set up		Line display
			Lamp time display
	Color temp.
			Keystone
	Options		Lamp control
	Language
	Information
	Menu	5			∞
∞	Image adj.
	Set up		English
	Color temp.		Deutsch
	Options		Español
			Italiano
	Language
	Information		Français
Menu		5			∞
Image adj.		Input		PC 1
Set up		Switcher		CH.0
Color temp.		Resolution		NTSC

	Options
3 or	Menu display	15sec	ON
ENTER Line display		5sec	OFF
	Lamp time display	ON	OFF
EXIT	Keystone	ENTER
	Lamp control	ENTER
	Page 2	ENTER

Press 5/∞ to

select an item. ENTER

Language

English

Deutsch

Español

Italiano

Français

Keystone 0

ENTER

EXIT
ENTER
Lamp control
Normal
LPC
LOC
Page 2
Flip H		OFF		ON
Flip V		OFF		ON
RS-232C [bps]		9600		19200
Sleep time [min]	15	30	60	OFF
Page 1	ENTER

FRANÇAISDEUTSHENGLISH

			ON*:		Displays when the lamp use time reaches 1000 hours when set in the LPC or LOC mode.
			OFF:		Does not display when the lamp use time reaches 1000 hours when set in the LPC or LOC
					mode.
	Keystone:				Press ENTER to enter the Keystone submenu.
			Keystone:			Adjust to correct the trapezoidal distortion of the projected image.
						(–80 to +128, 0*)
	Lamp control:
			Normal*:		Used as a normal lamp.
			LPC:		Lamp brightness is aLutomatically controlled with time.
			LOC:		Lamp brightness is controlled in 7 levels (-6 to 0) irrespective of the time. This is set within
					the menu.
	Page 2:				Press ENTER to enter the “Page 2” submenu.
				Flip H:		OFF* / ON (Select for upside-down hanging on the ceiling.)
				Flip V:		OFF* / ON (Select for upside-down hanging on the ceiling.)
				RS-232C [bps]:		Selectable baud rate (transmission speed). 9600 / 19200*
				Sleep time [min]:		Selectable sleep times. If no-signal condition continues for the
						period of selected time (Unite: Minutes), the projector enters the
						stand-by mode. 15 / 30 / 60 / OFF*
				Page 1:		Press ENTER to return to the “Page 1” submenu.
Language				Language for on-screen display.			→ (Refer to page 46)
	Japanese / English* / German / Spanish / Italian / French
Information →		(Refer to page 56)

Options	Frequency H	79.9kHz
Language	Frequency V	75	Hz
Information	Lamp time	123	h

You can see the information.

Press 5/∞ to select an item.

Press 2/3 to set or adjust the value.

Note

•The display languages of the menus are set to “English” when the projector is bought. The display language can be selected from the following 6 languages:

(Japanese)”, “English (English)”, “Deutsch (German)”, “Español (Spanish)”, “Italiano (Italian)” and “Français (French)”. (Refer to page 46.) The language settings in the section are explained in “English”.

ESPAÑOLITALIANO

	Input:	Shows the terminal name selected by the PC button. (PC1 or PC2)
	Switcher:	This display currently has no meaning. (“CH.0” is usually displayed to indicate that it is not being used.)
	Resolution:	Shows the resolution of the input signal being received. (Horizontal	⋅ Vertical)
		It may not be displayed correctly with some input signals.
	Frequency H:	Shows the horizontal frequency of the input signal being received. (	kHz)
	Frequency V:	Shows the vertical frequency of the input signal being received. ( Hz)
	Lamp time:	Accumulated used hours of the light-source lamp.
* : Factory set value.

41

42