JVC DLA-G150CLE About burning-in of the D-ILA device, About the installation place, Can Result

1-2

SAFETY PRECAUTIONS

IMPORTANT INFORMATION IMPORTANT SAFEGUARDS

– This product should be operated only with the type of

power source indicated on the label. If you are not sure

of the type of power supply to your home, consult your

product dealer or local power company.

– This product is equipped with a three-wire plug. This

plug will fit only into a grounded power outlet. If you are

unable to insert the plug into the outlet, contact your

– When connecting other products such as VCR’s, and

personal computers, you should turn off the power of this

product for protection against electric shock.

– Do not place combustibles behind the cooling fan. For

example, cloth, paper, matches, aerosol cans or gas

lighters that present special hazards when over heated.

– Do not look into the projection lens while the illumination

DLA-G150CLU DLA-G150CLE

No.51931

WARNING		:
TO	PREVENT	FIRE	OR SHOCK	HAZARDS, DO
NOT	EXPOSE	THIS	APPLIANCE	TO RAIN OR

MOISTURE.

CAUTION :

To reduce the risk of electric shock, do not remove cover.

Refer servicing to qualified service personnel.

This projector is equipped with a 3-blade grounding-type plug to satisfy FCC rule. If you are unable to insert the plug into the outlet, contact your electrician.

FCC INFORMATION (U.S.A. ONLY)

CAUTION :

Changes or modification not approved by JVC could void the user’s authority to operate the equipment.

NOTE :

This equipment has been tested and found to comply

with the limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage

to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

About burning-in of the D-ILA device

Do not allow the same still picture to be projected for a long time or an abnormally bright video picture to be projected. Do not project video images with high-intensity or high- contrast on a screen. The video image could be burned in to

the D-ILA device.

Use special care when projecting video games or computer program images. There is no problem with ordinary video-cassette playback images.

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your

personal safety. But	IMPROPER USE	CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR	FIRE HAZARD	. In

order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important Safeguards” carefully before use.

–All the safety and operating instructions should be read before the product is operated.

–The safety and operating instructions should be retained for future reference.

–All warnings on the product and in the operating instructions should be adhered to.

–All operating instructions should be followed.

–Place the projector near a wall outlet where the plug can be easily unplugged.

–Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

–Do not use attachments not recommended by the product manufacturer as they may be hazardous.

–Do not use this product near water. Do not use

immediately after moving from a low temperature to high temperature, as this causes condensation, which may

result in fire, electric shock, or other hazards.

–Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the manufacturer.

–When the product is used on a cart, care

should be taken to avoid quick stops, excessive force, and uneven surfaces

which may cause the product and cart to overturn, damaging equipment or

causing possible injury to the operator.

–Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug, or similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhered to.)

For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep /

distance more than 23- 5 /8" (60 cm).

electrician to install the proper outlet. Do not defeat the

safety purpose of the grounded plug.

– Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or

against them. Pay particular attention to cords at doors,

plugs, receptacles, and the point where they exit from the

product.

– For added protection of this product during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and

disconnect the cable system. This will prevent damage

to the product due to lightning and power line surges.

– Do not overload wall outlets, extension cords, or

convenience receptacles on other equipment as this can

result in a risk of fire or electric shock.

– Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or

short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

– Do not attempt to service this product yourself as

opening or removing covers may expose you to

dangerous voltages and other hazards. Refer all service

to qualified service personnel.

– Unplug this product from the wall outlet and refer service

to qualified service personnel under the following

conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the

product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the Operation Manual, as an

improper adjustment of controls may result in damage

and will often require extensive work by a qualified

technician to restore the product to normal operation.

e) If the product has been dropped or damaged in any

way.

f ) When the product exhibits a distinct change in performance – this indicates a need for service.

– When replacement parts are required, be sure the

service technician has used replacement parts specified

by the manufacturer or with same characteristics as the

original part. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

– Upon completion of any service or repairs to this product,

ask the service technician to perform safety checks to

determine that the product is in proper operating

condition.

– The product should be placed more than one foot away

from heat sources such as radiators, heat registers,

stoves, and other products (including amplifiers) that

lamp is turned on. Exposure of your eyes to the strong

light can result in impaired eyesight.

– Do not look into the inside of this unit through vents

(ventilation holes), etc. Do not look at the illumination

lamp directly by opening the cabinet while the

illumination lamp is turned on. The illumination lamp also

contains ultraviolet rays and the light is so powerful that

your eyesight can be impaired.

– Do not drop, hit, or damage the light-source lamp (lamp

unit) in any way. It may cause the light-source lamp to

break and lead to injuries. Do not use a damaged light-

source lamp. If the light-source lamp is broken, ask your

dealer to repair it. Fragments from a broken light-source

lamp may cause injures.

– Xenon gas is enclosed with high pressure inside the light-

source lamp (lamp unit) of this projector. If you drop or

impart a shock to the lamp, or discard it as is, there is the

possibility of explosion, leading to personal injury. Use

special care when handling the lamp. For any unclear

points, consult your product dealer.

– Do not “ceiling-mount” the projector to a place which

tends to vibrate; otherwise, the attaching fixture of the

projector could be broken by the vibration, possibly

causing it to fall or overturn, which could lead to personal

injury.

– Use only the accessory cord designed for this product to

prevent shock.

The power supply voltage rating of this product is

AC 120 V, the power cord attached conforms to the

following power supply voltage. Use only the power cord

designated by our dealer to ensure Safety and EMC.

When it is used by other power supply voltage, power

cable must be changed.

Ensure that the power cable used for the projector is the

correct type for the AC outlet in your country.

Consult your product dealer.

Power cord

Power supply voltage: AC 120 V

*DO NOT allow any unqualified person to install the unit.

Be sure to ask your dealer to install the unit (eg. attaching it to the ceilling) since special technical knowledge and skills are required for installation.

If installation is performed by an unqualified person, it may cause personal injury or electrical shock.

FRANÇAISENGLISH

About the installation place

Do not install the projector in a place that cannot support its weight securely.

If the installation place is not sturdy enough, the projector could fall or overturn, possibly causing personal injury.

2

produce heat.

3