JVC DLA-G150CLU, DLA-G150CLE manual Menu Transition Diagram in Video Menu Mode

E N T E R

Menu Operations

■Menu Transition Diagram in Video Menu Mode

Main menu in Video Menu Mode

Submenus in Video Menu Mode

Press 5/∞ to select an item.

Press 5/∞ to select an item.

Press 2/3 to select Yes or No.

Press 2/3 to set or adjust the value.

Then, press ENTER to execute.

Menu

Image adj.

Image adj.

Image adj.

Contrast

3 or

Contrast

12

Set up

Brightness

Brightness

12

EXIT

All reset?

Color temp.

Color

ENTER

Color

12

Options

Tint

Yes

No

Tint

12

Language

Sharpness

EXIT

All reset

Sharpness

1

Information

ENTER

All reset

ENTER

Menu Operations

.
■ Quick Reference Guide			for Video Menu Mode
Main Menu in Video Menu Mode (While receiving video-device-related signals)
	Image adj. → (Refer to page 49)
		Contrast:	Contrast of the video image being projected can be adjusted. (–30 to +30, 0*)
		Brightness:	Brightness of the video image being projected can be adjusted. (–30 to +30, 0*)
		Color:	Color density of the video image being projected can be adjusted. (–30 to +30, 0*)
		Tint:	Tint of the video image being projected can be adjusted. (–30 to +30, 0*)
		Sharpness:	Sharpness of the video image being projected can be adjusted. (–5 to +5, 0*)
		All reset:	Resets above items to the factory set values.
			Yes / No
	Set up 1

No.51931

∞

5		5	∞
	Menu
	Image adj.	Position
		Gamma
	Set up
		Aspect ratio
	Color temp.	Decoder
	Options	Tracking
		Deinterlace
	Language	Phase
	Information	Screen
		HDTV
		5	∞

Menu
Image adj.	Color temp.
Set up	RED
Color temp.	GREEN
Options	BLUE
	Call reset
Language
Information

Menu	5	∞
	Menu display
Image adj.
Set up	Line display
	Lamp time display
Color temp.
	Keystone

	Press 5/∞ to select an item.					Press ENTER to select an item.
	Press 2/3 to set or adjust the value.					Press 5/∞ / 2/3 to move the video screen/menu position.
						Position
	Set up 1				ENTER
3 or	Position		ENTER
ENTER Gamma		Down	Cinema	Up	EXIT	Disp.Posi.	Menu
	Aspect ratio		4:3	16:9	ENTER	12,12	ENTER
EXIT	Decoder		ENTER
					EXIT
	Page 2		ENTER
	Press 5/∞ to select an item.					ENTER
	Press 2/3 to set or adjust the value.						Press 5/∞ to select an item.

	Set up 1				ENTER		Decoder
	Position	ENTER
	Gamma	Down	Cinema	Up				AUTO [	NTSC ]
	Aspect ratio		4:3	16:9				NTSC
	Page 2	ENTER						NTSC4.43
						ENTER		PAL
	Tracking	123						SECAM
	Set up 2
	Phase	12
	Screen		4:3	16:9
	HDTV		1080i	1035i
	Page 1	ENTER					Set up 2		Press 5/∞ to select an item.
											* The film function is
	Press 5/∞ to select an item.						Deinterlace		Video Film	AUTO
											displayed when the
	Press 2/3 to set or adjust the value.						Phase		12		input signal is
3 or	Color temp.				ENTER		Screen		4:3	16:9	equivalent to NTSC
	Color temp.	Low	Middle	High			HDTV		1080i	1035i	or PAL. The tracking
ENTER
	RED	123					Page 1		ENTER		function is displayed
											for other signals.
	GREEN
		123
EXIT BLUE		123				EXIT
	All reset	ENTER

Press 5/∞ to select an item.

Press 5/∞ to select an item.Color temp. Press 2/3 to set or adjust the value. Press 2/3 to set or adjust the value.

	Options			E
3 or	Menu display	15sec	ON	N	All reset?
				E
				T
ENTER Line display		5sec	OFF	R
				Yes	No
	Lamp time display	ON	OFF

ENGLISH

	Position:			Video screen position and menu position can be adjusted.			→ (Refer to page 51)
			Disp. Posi. / Menu					→ (Refer to
	Gamma:			Image tone can be changed. Down/Cinema*/Up (Suitable for the cinema programes)
				page 52)
	Aspect ratio			Selectable aspect ratio, 4:3*/16:9. →	(Refer to page 52)
	Decoder:			Selectable color systems, Normally, set to AUTO.		(Refer to page 45)
				(This item is displayed only when inputting VIDEO or Y/C.)
			AUTO*/NTSC/NTSC4.43/PAL/SECAM
	Page 2 Press ENTER to enter the “Set up 2” submenu
		Tracking: Normally, no adjustment is required. The lateral size and display area of video image can be
				adjusted. (–128 to + 127) → (Refer to page 47)
		Deinterlace:		Set when watching movies which were recorded on film.			→ (Refer to page 47)
		Phase:		Flickering or dim picture image can be adjusted. (0 to 31)
		Screen:		Selectable screen’s aspect ratio. 4:3*/16:9	→	(Refer to page 46)
		HDTV:		Selectable HDTV format. Normally, set to 1080i, 1080i*/1035i			→ (Refer to page 46)
		Page 1:		Press ENTER to return to “Page 1” submenu.
Color temp.
	Color temp.:			Adjustable color temperature, Low/Middle*/High.
				Will be adjusted to correct reddish or blueish image.
	RED:			Adjusts the red level. (0 to 255, the adjustable range varies depending on signals)
	GREEN:			Adjusts the green level. (0 to 255, the adjustable range varies depending on signals)
	BLUE:			Adjusts the blue level. (0 to 255, the adjustable range varies depending on signals)
	All-reset:			Reset above items to the factory set values.
		Yes/No
Options → (Refer to page 54)
Options 1
	Menu display:			15sec* (Menu disappears in 15 seconds.) / ON (Menu stays on.)
	Line display:			5sec* (Line display such as “VIDEO”, “Y/C”, “PC1”, or “PC2” appears on top right of the screen for
				5 seconds when the VIDEO or PC button is pressed.) / OFF (Line display does not appear.)
	Lamp time display:
		ON*:		Displays when the lamp use time reaches 1000 hours when set in the LPC or LOC mode.
		OFF:		Does not display when the lamp use time reaches 1000 hours when set in the LPC or LOC mode.
	Keystone:			Press ENTER to enter the Keystone submenu.

Options	Lamp control
Language
Information

5	∞
Menu
Image adj.
Set up	English
Color temp.	Deutsch
Options	Español
Language	Italiano
Information	Français
5	∞

EXIT	Keystone	ENTER
	Lamp control	ENTER
	Page 2	ENTER

ENTER

You can see the information. Press 5/∞ to select an item.

	Language
3 or
ENTER
		English
		Deutsch
		Español
EXIT		Italiano
		Français

ENTER

EXIT

Keystone 123

ENTER

Lamp control

Normal

LPC

LOC

FRANÇAISDEUTSH

	Keystone:			Adjust to correct the trapezoidal distortion of the projected image.
				(–80 to +120, 0*)
Lamp control:
	Normal*:		Used as a normal lamp.
	LPC:		Lamp brightness is automatically controlled with time.
	LOC:		Lamp brightness is controlled in 7 levels (-6 to 0) irrespective of the time. This is set within the menu.
Page 2:			Press ENTER to enter the “Page 2” submenu.
		Flip H.:		OFF* / ON (Select for upside-down hanging on the ceiling.)
		Flip V:		OFF* / ON (Select for upside-down hanging on the ceiling.)
		RS-232C [bps]:		Selectable baud rate (transmission speed). 9600 / 19200*
		Sleep time [min]:		Selectable sleep times. If no-signal condition continues for the period of
				selected time (Unite: Minutes), the projector enters the stand-by mode. 15 / 30
				/ 60 / OFF*

1-61

Menu
			Page 2
Image adj.	Input	PC1	Flip H	OFF	ON
Set up
	Switcher	CH.0	Flip V	OFF	ON
Color temp.	Source	NTSC
			RS-232C [bps]	9600	19200
Options
Language			Sleep time [min]	15 30	60 OFF
Information	Lamp time	123 h	Page 1	ENTER
			Press 5/∞ to select an item.
		Note	Press 2/3 to set or adjust the value.

•The display languages of the menus are set to “English” when the projector is bought. The display language can be selected from the following 6 languages:

(Japanese)”, “English (English)”, “Deutsch (German)”, “Español (Spanish)”, “Italiano (Italian)” and “Français (French)”. (Refer to page 46.)

The language settings in the section are explained in “English”.

39

ESPAÑOLITALIANO

		Page 1:	Press ENTER to return to the “Page 1” submenu.
Language			Language for on-screen display.	→ (Refer to page 46)
	Japanese / English* / German / Spanish / Italian / French
Information → (Refer to page 56)
	Input:		Shows the terminal name selected by the VIDEO or PC button. (Y/C, VIDEO, COMP, PC1, PC2 or DVI)
	Switcher:		Has no meaning. This display currently has no meaning, (“CH.0” is usually displayed to indicate
			that it is not being used.)
	Source:		Shows the projected image’s type of video signal.
	Lamp time:		Accumulated used hours of the light-source lamp.

* : Factory set value.

40

DLA-G150CLU DLA-G150CLE