JVC DLA-G150CLU manual Remote control unit Quick Alignment Function, Zooming a Part of the Image

Basic Operations
■ Remote control unit
	Quick Alignment Function
	(QUICK ALIGN.)

Basic Operations

■ Remote control unit Displaying a Still Picture (FREEZE)

While projecting an image, a still picture is obtained at any time by using the FREEZE button on the remote control.

QUICK ALIGN.

QUICK

ALIGN.OPERATE

The Quick Alignment function automatically adjusts (sets) the screen settings of the image input from the PC1, PC2 or DVI input terminals. This can only be performed from the remote control.

QUICK

ALIGN.

HIDE

W

OPERATE

When you press the FREEZE button:

“FREEZE” appears on the screen for a few seconds and

then the still picture is shown on the screen. Refer to the

button W

HIDE

SCREEN	FREEZE
S

COMP VIDEO

FREEZE button

FREEZE message shown on the left of this page.

SCREEN	FREEZE	COMP	VIDEO
S
PC1	PC2	DVI	Y/C
	T	T
KEYSTONE	DIGITAL	ZOOM	FOCUS
	ZOOM
	W	W
	PRESET		MENU
	EXIT		ENTER

While projecting an image on the screen, press the QUICK ALIGN. button on the remote control.

Quick alignment is conducted to obtain best image.

*During the automatic alignment, “Quick Alignment” appears on the screen, and then disappears when the alignment is completed.

Remote control unit

QUICK

DIGITAL ZOOM T/W button

PRESET button

EXIT button

PC1	PC2
	T
KEYSTONE	DIGITAL
	ZOOM
	W
	PRESET
	EXIT

RM-M160 REMOTE CONTROL UNIT

DVI Y/C

T

ZOOM FOCUS

W

MENU

ENTER

Cursor buttons 5/∞ / 2/3

* To forcibly clear “FREEZE”, press the EXIT button.

When you press the FREEZE button again.

The original image resumes.

Remote control unit FREEZE

Notes

RM-M160 REMOTE CONTROL UNIT

No.51931

ALIGN.

[Screen display]

Q u i c k A l i g n m e n t

Notes

•This only works for the signals input from the PC1, PC2 or DVI input terminals. It does not work for the signals input from the AV IN terminal (VIDEO, Y/C or COMP input terminal).

•The quick alignment function is used to automatically adjust

the “Horizontal and vertical position”, “Phase” and “Tracking” of the projected image.

•When using the quick alignment function to automatically adjust the image, use a bright, still-picture. It may not function correctly on a dark or motion picture. If the results obtained with the quick alignment function are not satisfactory, manually adjust the “Horizontal and vertical position”, “Phase” and “Tracking” of the projected image.

FREEZE message

FREEZE

FREEZE inhibit message

FREEZE

DIGITAL ZOOM inhibit message

D.ZOOM

•During freezing, the picture sent from the signal source is lost.

•If any of the inoperative buttons (“MENU”, “QUICK ALIGN.”, “KEYSTONE”) are pressed while displaying a still picture, “FREEZE” is displayed on the screen.

•This function will not work with some signal sources

(UXGA, etc). In this case, the FREEZE inhibit message

appears for a few seconds, as shown on the left. To forcibly clear this message, press the EXIT button.

Zooming a Part of the Image

(DIGITAL ZOOM T/W)

A part of the image being projected can be digitally magnified up to four times. When the DIGITAL ZOOM T or W button is

pressed, “Digital zoom” appears on the screen together with the level bar and magnifying power ( ⋅ 1.0, ⋅ 1.2, ⋅ 1.4, ⋅ 1.6, ⋅ 2.0,

⋅2.5, ⋅ 3.2, ⋅ 4.0). When “15 sec.” is displayed in the menu, “Digital zoom” will appear in approximately 15 seconds.

Digital zoom 1.2

•To zoom up or zoom down, press the DIGITAL ZOOM T or W button on the remote control.

Remote control unit

T

DIGITAL

ZOOM

W

Moving the zoomed image:

While “Digital zoom” appears on the screen, you can move

the zoomed image with the cursor ( 5/∞/2/3) button on the remote control.

5: Upper part of the image will be displayed.

∞: Lower part of the image will be displayed.

2: Left side part of the image will be displayed.

3: Right side part of the image will be displayed.

Notes

•This function will not work with some signal sources (UXGA, etc). In this case, the DIGITAL ZOOM inhibit

message appears for a few seconds, as shown on the left. To forcibly clear this message, press the EXIT button.

•The quality of the zoomed image reduces in comparison with the original one.

•To return to the original size ( ⋅ 1.0) and original position, press the PRESET button while “Digital zoom” is displayed

on the screen.

ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH

DLA- DLA-

36

1-19

37

G150CLU G150CLE