JVC DLA-G150CLU, DLA-G150CLE manual Adjusting Tracking/Phase

Menu Operations

Adjusting Tracking/Phase

Normally, tracking and phase adjustments are automatically carried out when a video signal is input to the projector for the first time, or when the QUICK ALIGN. button on the remote control is pressed.

However, you can manually adjust the tracking and phase on the menu.

If a wide stripe appears on the screen, adjust the lateral size of the picture image and the display area (tracking adjustment) so the stripe disappears.

Also, if text projected on the screen appears flickers or appears dim, adjust phase adjustment so it becomes clear.

1Press the MENU button.

The main menu appears on the screen.

2 Select “Set up” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Set up 1” (video mode) or “Set up” submenu appears on the screen.

In video mode: Select set up 2 with the cursor ∞ or5, and press ENTER button.

The “Set up 2” submenu appears on the screen.

Video submenu PC submenu

Menu Operations

Set up for Watching Image Software (Video Menu Mode Only)

This unit has a function which allows you to project movies, which were recorded on film, in the best possible conditions. (Function to convert 2-3 pull-down interlace scans to progressive scans)

Normally use set to AUTO.

1Press the MENU button.

The main menu appears on the screen.

2 Select “Set up” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Set up 1” submenu appears on the screen.

3 Select “Set up 2” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Set up 2” submenu appears on the screen.

4Select “Deinterlace” with the cursor button5 or ∞.

5 Select the Deinterlace function mode with the cursor button 2 or 3.

No.

Set up 1				Set up 2
Position	ENTER			Tracking	123
Gamma	Down	Cinema	Up	Phase	12
Aspect ratio		4:3	16:9	Screen	4:3	16:9
Decoder	ENTER			HDTV	1030i	1035i
Page 2	ENTER			Page 1	ENTER

Decoder is only displayed when there is a signal for the AV IN terminal.

Set up

Tracking		123
Phase		12
Position		ENTER
Resize	1:1	Panel	Aspect
Clamp	ST		BP

Video: When watching images recorded with a video camera

Film: When watching images recorded on film

AUTO: The setting is changed automatically

6Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

Note

51931

1-65

3Select “Tracking” or “Phase” with the cursor button5 or ∞.

4Adjust the tracking or phase with the cursor2 or 3.

Adjust the tracking and phase of the picture image being projected. To adjust the phase, first check for correct tracking adjustment.

*To adjust multiple items, repeat 3 and 4.

Adjustment item	Button	Adjustment content
Tracking	2 or3	The picture image shrinks laterally (right-to-left) or extends laterally (left-to-
		right). (–128 ↔ +127)
Phase	2 or3	Set to a position where text appears clear. (0 ↔ 31)

5Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

Note

•A dim image could be caused by insufficient adjustment of brightness and contrast. Before adjusting phase, make sure that brightness and contrast are correctly adjusted. To adjust them, refer to “Adjusting Picture Quality” on page 49.

47

•Operates when the signal is an NTSC or PAL interlace signal. Does not operate for other signals. (The menu is not displayed when other signals are inputted.)

ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH

48

DLA-G150CLU DLA-G150CLE