JVC DLA-G150CLE manual Adjusting the Video Screen/Menu Position, Adjusting Color temperature

1-26

Menu Operations

.

Image adj.

All reset?

YesNo

Menu Operations

Adjusting the Video Screen/Menu Position

The position of the video screen and the menu on the video screen can be adjusted. You can finely adjust the video screen position. The menu will move widely on the video screen.

1Press the MENU button.

The main menu appears on the screen.

2 Select “Set up” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Set up 1” or “Set up” submenu appears on the screen.

DLA-G150CLU DLA-G150CLE

5Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

Memo

In some adjustments, the level bar changes according to the set value. (The setting value is also displayed at the left of the level bar.)

Adjusting Color temperature

Video submenu (“Set up 1” submenu)

Set up 1

Position		ENTER
Gamma	Down	Cinema	Up
Aspect ratio		4:3	16:9
Decoder		ENTER
Page 2		ENTER

PC submenu (Set up submenu)

Set up

Tracking		123
Phase		12
Position		ENTER
Resize	1:1	Panel	Aspect
Clamp	ST		BP

No.51931

1Press the MENU button.

The main menu appears on the screen.

2Select “Color temp.” with the cursor button5 or ∞, and press3 or the ENTER

button.

The “Color temp.” submenu appears on the screen.

3 Select “Color temp.” with the cursor button5 or ∞.

4Adjust the color temperature with the cursor button2 or 3.

	Low:	Color temperature decreases (image becoming reddish).
	Middle:	Results in middle color temperature. (Factory set position).
	High:	Color temperature increases (image becoming blueish).
5	Select “RED” or “GREEN” or “BLUE” with the		cursor button	5 or ∞.
6	Fine	adjust the color temperature with	the cursor button2 or 3.
	To adjust multiple items, repeat 5 and 6.

Adjustment item	Button	Adjustment content
RED	2 or3	Adjusts the red level. (0 to 255)
GREEN	2 or3	Adjusts the green level. (0 to 255)
BLUE	2 or3	Adjusts the blue level. (0 to 255)

■ To perform All Reset

• In the Color temp. submenu, select “All reset” with the cursor button 5 or∞, and press the ENTER button. Then, the “All reset” submenu appears on the screen.

•Press the cursor button 2 to select “Yes”, and then press the ENTER button.

•All items in the Color temp. submenu are reset to the factory set values and the menu returns to the previous one.

To exit the “All reset” submenu without performing All reset, select “No” with the cursor button	3 and, press the ENTER
button

7Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

50

Decoder is only displayed when there is a signal for the AV IN terminal.

3 Select “Position” with the cursor button 5 or ∞, and press the ENTER button.

The “Position” submenu appears on the screen.

Position

Disp.Posi.Menu

Horizontal position 12,12 ENTER

Vertical position

4Press the ENTER button to select “Disp.Posi.” or “Menu”.

Disp.Posi. (Display Position):The video screen position (display position) can be adjusted.

Menu:The menu position can be adjusted.

5Press the cursor button 5, ∞, 2 or 3 to move the video screen (display) or the

menu.

*Repeat 4 and 5 to move both video screen (display) and menu positions.

Adjustment item	Button	Adjustment	content
Disp.Posi. - H	2 or3	The video screen moves to the left or right. (–30		↔ +30)
Disp.Posi. - V	5 or∞	The video screen moves up or down. (–30	↔	+30)
Menu - H	2 or3	The menu moves to the left or right. (Left, center*, right)
Menu - V	5 or∞	The menu moves up or down. (Top, center*, bottom)

* : Factory set value

6Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

51

ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH