JVC DLA-G150CLE, DLA-G150CLU manual Auto

1-64

Menu Operations

Changing the Color System (Video Menu Mode Only)

This function is available only in Video menu mode.

The menu is only displayed when there is a signal for the AV IN (Y/C, VIDEO and COMP) terminal.

Normally, use the color system in AUTO. If operation in AUTO is unstable, such as color not being shown, set to a dedicated color system in accordance with the color system of the video signal being input.

1Press the MENU button.

The main menu appears on the screen.

2 Select “Set up” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Set up 1” submenu appears on the screen.

3 Select “Decoder” with the cursor button 5 or ∞, and press the ENTER button.

The “Decoder” submenu appears on the screen.

Video submenus

Menu Operations

Changing the Language Display

The on-screen language is set to “English” when shipped from the factory. When you want to change to another language, set it as follows.

1Press the MENU button.

The main menu appears on the screen.

2 Select “Language” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Language” submenu appears on the screen.

Language

			:	Japanese
	English	:	English
English	Deutsch	:	German
Deutsch
	Español		:	Spanish
Español	Italiano		:	Italian
Italiano	Français	:	French

DLA-G150CLU DLA-G150CLE

Set up 1

Position		ENTER
Gamma	Down	Cinema	Up
Aspect ratio		4:3	16:9
Decoder		ENTER
Page 2		ENTER

ENTER

EXIT

Decoder

AUTO [ NTSC ]

NTSC

NTSC4.43

PAL

SECAM

Français

3 Set the language with the cursor button5 or ∞.

4Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

Memo

No.51931

4 Set the color system with the cursor button5 or ∞.

AUTO:	Normally, set to “AUTO”. (Factory set value)
	The color system of a video signal being input is automatically identified and displayed in [ ].
	In [ ], B/W (Black & White), NTSC, NTSC4.43, PAL or SECAM will be displayed. (It is not always displayed.)
	For example, AUTO [ NTSC ] shows that the NTSC signal is being received.
NTSC:	Dedicated to NTSC.
NTSC4.43:Dedicated to NTSC4.43.
PAL:	Dedicated to PAL.
SECAM:	Dedicated to SECAM.

5Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

45

ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH

About language display

Some words in the menu and messages such as “Quick Alignment”, “Keystone”, “VIDEO” and “NTSC” are shown only in English.

Changing the Screen aspect ratio/HDTV format (Video Menu Mode Only)

1Press the MENU button.

The main menu appears on the screen.

2 Select “Set up” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Set up 1” submenu appears on the screen.

3 Select “Set up 2” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Set up 2” submenu appears on the screen.
4 Select “Screen”	or “HDTV” with the cursor button 5 or ∞.
5 Adjust the Screen aspect ratio			or HDTV format with the	cursor button2 or 3.
To adjust multiple items, repeat 4 and 5.
Adjustment item	Button		Adjustment	content
Screen	2 or3	Select according to the aspect ratio of the screen used.
		4:3	16:9
HDTV	2 or3	Set the number of effective scanning lines. Normally, select 1080i.
		1080i:	1035i:

6Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

46