JVC DLA-G150CLE, DLA-G150CLU manual Adjust the color temperature with Cursor button 2 or

1-66

Menu Operations

Adjusting Picture Quality

In the “Image adj.” submenu, adjust brightness, contrast, sharpness, etc. to obtain the desired picture quality. Note that the adjustment items differ in Video menu mode and PC menu mode.

1Press the MENU button.

The main menu appears on the screen.

2 Select “Image adj.” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Image adj.” submenu appears on the screen.

Menu Operations

.

Image adj.

All reset?

YesNo

DLA-G150CLU DLA-G150CLE

Video submenu

Image adj.

Contrast 12

Brightness 12

Color12

Tint12

Sharpness1

All reset ENTER

PC submenu

Image adj.

Contrast	12
Brightness	12
Sharpness	1	2	3	4	5
All reset	ENTER

5Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

Memo

In some adjustments, the level bar changes according to the set value. (The setting value is also displayed at the left of the level bar.)

Adjusting Color temperature

3Select the item to be adjusted with the cursor button5 or ∞.

*“Color” and “Tint” are shown in Video submenu only.

4Make adjustment with the cursor2 or 3.

*To adjust multiple items, repeat 3 and 4.

No.	Adjustment item	Button					Adjustment content
	Contrast	2 or3	Gets lower/higher. (–30			↔	0* ↔	+30)
51931
	Brightness	2 or3	Gets darker/brighter. (–30			↔	0* ↔		+30)
	Color	2 or3	Gets softer/deeper. (–30			↔	0* ↔	+30)
			(Video menu mode only)
	Tint	2 or3	Gets reddish/greenish. (–30				↔	0* ↔	+30)
			(Video menu mode only)
			Gets softer/sharper.			↔	0* ↔
			• Video menu mode: (–5					+5)
			• PC menu mode: (1		↔	3* ↔ 5)
	Sharpness	2 or3
				Note
			• When in the PC menu mode, if the resize function in the PC submenu is set to
				“1:1”, the image quality will not change even if the value is changed.
	All reset	ENTER	Resets above items to the factory set values. How to operate is mentioned below
			(next page).
	* : Factory set value
	■ To perform All Reset
	• In the Image adj. submenu, select “All reset” with the cursor button					5 or∞, and press the ENTER button. Then, the “All
	reset” submenu appears on the screen.

•Press the cursor button 2 to select “Yes”, and then press the ENTER button.

•All items in the “Image adj.” submenu are reset to the factory set values and the menu returns to the previous one.

To exit the “All reset” submenu without performing All reset, select “No” with the cursor button	3 and, press the ENTER
button.
(To be continued on the next page)

49

ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH

1Press the MENU button.

The main menu appears on the screen.

2Select “Color temp.” with the cursor button5 or ∞, and press3 or the ENTER

button.

The “Color temp.” submenu appears on the screen.

3 Select “Color temp.” with the cursor button5 or ∞.

4Adjust the color temperature with the cursor button2 or 3.

	Low:	Color temperature decreases (image becoming reddish).
	Middle:	Results in middle color temperature. (Factory set position).
	High:	Color temperature increases (image becoming blueish).
5	Select “RED” or “GREEN” or “BLUE” with the		cursor button	5 or ∞.
6	Fine	adjust the color temperature with	the cursor button2 or 3.
	To adjust multiple items, repeat 5 and 6.

Adjustment item	Button	Adjustment content
RED	2 or3	Adjusts the red level. (0 to 255)
GREEN	2 or3	Adjusts the green level. (0 to 255)
BLUE	2 or3	Adjusts the blue level. (0 to 255)

■ To perform All Reset

• In the Color temp. submenu, select “All reset” with the cursor button 5 or∞, and press the ENTER button. Then, the “All reset” submenu appears on the screen.

•Press the cursor button 2 to select “Yes”, and then press the ENTER button.

•All items in the Color temp. submenu are reset to the factory set values and the menu returns to the previous one.

To exit the “All reset” submenu without performing All reset, select “No” with the cursor button	3 and, press the ENTER
button

7Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

50