JVC DLA-G150CLU, DLA-G150CLE manual Changing the Image Gamma/Aspect Ratio Video Menu Mode Only

Menu Operations

Changing the Image Gamma/Aspect Ratio (Video Menu Mode Only)

Menu Operations

Changing the Image Size - Resize Function (PC Menu Mode Only)

No.51931

The image Gamma (Down, Cinema or Up) and the aspect ratio (4:3 or 16:9) are selectable in Video menu mode.

1Press the MENU button.

The main menu appears on the screen.

2 Select “Set up” with the cursor button5 or ∞, and press3 or the ENTER button.

The “Set up 1” submenu appears on the screen.

Video submenu

Set up 1

Position		ENTER
Gamma	Down	Cinema	Up
Aspect ratio		4:3	16:9
Decoder		ENTER
Page 2		ENTER

Decoder is only displayed when there is a signal for the Video IN terminal.

3 Select “Gamma” or “Aspect ratio” with the cursor button5 or ∞.

4 Adjust	the	image tone or aspect ratio with the cursor2 or 3.
*To adjust multiple items, repeat 3 and 4.
Adjustment	item		Button		Adjustment content
				The image Gamma projected on the screen can be changed.
Gamma			2 or3	Down	: Suitable for projecting the video programs.
				Cinema* : Normally use in this mode.
				Up	: Suitable for projecting the cinema programs.
				Sets the vertical-to-horizontal ratio (4:3 or 16:9) of the video image projected.
				“4:3*” : The aspect ratio of the projected image becomes 4:3. Set it to 4:3 for video
Aspect ratio			2 or3		of NTSC, NTSC4.43, PAL, SECAM.
				“16:9” : The aspect ratio of projected image becomes 16:9. Set it to 16:9 for Hi-
					Vision devices (W-VHS VCR, etc.).
* : Factory set value

5Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

The picture image projected can be selectable with the Resize function which is available only in PC menu mode.

You can choose the video image size projected from the following: (Factory setting is “Aspect”.)

“1:1”: The image is displayed at the input resolution. The picture image projected is not enlarged even if its number of pixels (resolution) is smaller than that of

the projector’s D-ILA element (1365 pixels ⋅ 1024 pixels).

Resize: 1:1

Full size (1365 ⋅ 1024)

Image not enlarged

Panel: The picture image projected is virtually enlarged to

the full size (1365 pixels ⋅ 1024 pixels). The horizontal and vertical enlargement ratio will differ depending on the original image and the image will

be deformed.

Resize: Panel

Image enlarged to the full size (1365 ⋅ 1024)

Image not enlarged (Original image)

Aspect: While maintaining the original aspect ratio, the video image projected is virtually enlarged until either the horizontal or vertical side reaches the full size (1365 pixels ⋅ 1024 pixels).

Resize: AspectImage enlarged to the aspect size. (Example: aspect ratio is 16:9)

Full size (1365 ⋅ 1024)

Image not enlarged (original image) (Example: aspect ratio is 16:9)

Image enlarged to the aspect size. (Example: aspect ratio is 5:4)

Full size (1365 ⋅ 1024)

Image not enlarged

(original image)

(Example: aspect ratio is 5:4)

1Press the MENU button.

The main menu appears on the screen.

2Select “Set up” with the cursor button 5 or ∞, and press3 or the ENTER

button.

The “Set up” submenu appears on the screen.

PC submenu

Set up

Tracking		123
Phase		12
Position		ENTER
Resize	1:1	Panel	Aspect
Clamp	ST		BP

3Select “Resize” with the cursor button 5 or ∞.

4Choose “1:1”, “Panel”, or “Aspect” with the cursor button2 or 3.

5Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

Changing the Clamp pulse position (PC Menu Mode Only)

When the image is too dark or bright, or when the image is unstable, switching the position may improve the image quality. Normally, set to “BP”.

1Press the MENU button.

The main menu appears on the screen.

2Select “Set up” with the cursor button 5 or ∞, and press3 or the ENTER

button.

The “Set up” submenu appears on the screen.

3Select “Clamp” with the cursor button 5 or ∞.

4Choose “ST” or “BP” with the cursor button 2 or 3.

5Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.

ST: Sync Tip BP: Back Porch

ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH

DLA- DLA-

1-27

52

53

G150CLU G150CLE