INK ROLLER REPLACEMENT
If printing is blurry even when the ink roller is in the proper position, replace the roller.
Ink roller: Type EA-781R-BK (Black)
Type EA-781R-RD (Red)
WARNING
APPLYING INK TO WORN INK ROLLER OR USE OF UNAPPROVED INK ROLLER MAY CAUSE SERIOUS DAMAGE TO PRINTER.
1) | Set the power switch to OFF. |
|
| |
2) | Remove the printer cover. (Fig. 1) |
|
| |
3) | Remove the ink roller by turning it counterclockwise and pulling it upward (Fig. 2) | |||
4) | Install the correct color new ink roller and press it in the correct position. Make sure | |||
| that the ink roller is securely in place. (Fig. 3) | Red | Black | |
5) | Put back the printer cover. | |||
|
| |||
Fig. 1 | Fig. 2 | Fig. 3 |
Cleaning the printing mechanism
If the print becomes dull after long time usage, clean the printing wheel accord- ing to the following procedures:
1)Remove the printer cover and the ink roller.
2)Install the paper roll and feed it until it comes out of the front of the printing mechanism.
3)Put a small brush (like a tooth brush) lightly to the printing wheel and clean it by pressing 
.
4)Put back the ink roller and the printer cover.
Notes: • Do not rotate the printing mechanism manually, this may damage the printer.
•Never attempt to turn the printing belt or restrict its movement while printing. This may cause incorrect printing.
5