Sigma SQM-160 manual Chapter MonComm Software Graph Data

Chapter 4 MonComm Software

4.5Graph Data

The SQM-160 graphs are accessed by clicking the Graph button.

Two graphs of data from the SQM-160 can be displayed. The first displays the average rate of all active channels versus time. The second graph displays each individual channel’s rate versus time. To the right of the graph average rate, average thickness, each channel’s rate, elapsed time, and estimated time remaining until final thickness are displayed.

The display is changed from one graph to the other by clicking on the Channel/Average button in the upper left hand corner of the screen. The caption on the button is the graph that will appear if the button is clicked.

Graphing begins when the Go button is clicked. Graphing continues until the Stop button is clicked.

4-4