4. UPS functions
2-2 Settings
The UPS operation mode can be set if the power switch is turned ON while the beeper stop switch is pressed.
Note: While in setting mode, output from the power supply output is OFF even if the power switch is ON.
電源出力 | バッテリ | ブザー停止/テスト | |
増設 |
| ||
|
|
| |
|
| - |
|
バイパス | バッテリ |
| |
運転 | 交換 |
| |
|
|
|
|
|
|
|
|
(1) When the beeper stop switch is briefly pressed (for less than 1 second), the next item is displayed.
Cold start ON/OFF setting
Output voltage setting
Power supply output stop delay time setting
Signal input/output test
(2)The unit enters the “individual item setting mode” when the beeper stop switch is pressed and held (for more than 1 second).
(3)When the power switch is turned OFF, the setting mode quits and the unit enters power switch OFF status (status No.2).
49