6. Maintenance and inspection
5. Insert a new battery into the UPS as far as it will go. ➀
●Replacement battery pack
For BU1002SW: Model BP100XS
Attach the plate cover.
Insert the lug at the bottom of the cover into the hole in the main body ➁ and push it towards the main body. ➂ Use a screwdriver to securely tighten (clockwise) the 2 screws you removed. √
Do not pinch the cable with the plate cover.
Tighten the 2 screws.
90% 
50% 
30% 
90% 
50% 
30% 
3
2 |
90% |
|
50% |
|
30% |
|
電源出力 | バッテリ |
| 増設 |
バイパス | バッテリ |
運転 | 交換 |
4
1
6. Insert the connector until it is locked. ➀ Secure the connector to the plate cover. ➁
You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s operation is stopped, but this sound is not abnormal.
Secure the connector by the 3 supports on the plate cover.
1
2
If you cannot secure the connector to the plate cover, the connector is not inserted completely.
Insert the connector again.
57