7．Using the UPS monitoring software and contact signal
• UPS monitoring software function list
| Software title | |
Function | ||
| Required options | |
| Windows Server 2003 x64 Edition | |
| ||
| Windows XP x64 Edition | |
OS | Windows Server 2003 | |
Windows XP/2000 | ||
Compatible | ||
Windows NT4.0 | ||
| ||
| Windows Me/98 | |
| Linux (Note 4) | |
| Mac OS X v10.4/Server v10.4 | |
| Mac OS X v10.3/Server v10.3 (Note 5) | |
| Auto shutdown | |
| UPS monitoring (operating status) | |
function | UPS monitoring (data) | |
| ||
| End when OS is inactive (Note 3) | |
Software | Auto file save (Note 3) | |
Schedule operation | ||
| ||
| UPS setting change | |
| External command execution | |
| Event log save | |
| Data log save | |
| Coordinated shutdown (shutdown of multiple units) | |
| Output receptacle control | |
| Redundant power supply support | |
| Remote UPS management | |
| Mail send | |
| SNMP management | |
| Telnet connection | |
| SYSLOG support | |
|
| |
●Standard ●Option ▲Limited
|
|
| General applications |
|
|
| Network management | SNMP management | |||||||
|
|
|
|
|
| applications | applications | ||||||||
|
| (Simple functions, standalone) | |||||||||||||
|
| (Advanced functions, | (Advanced functions, | ||||||||||||
|
|
|
|
|
|
|
|
| network support) | network support) | |||||
UPS service | OS standard | UPS Power | PowerAct Pro | SNMP/Web | |||||||||||
driver | UPS service | Manager (Mac) | card | ||||||||||||
|
|
| |||||||||||||
|
|
| Connection cable |
|
|
|
|
|
| SNMP/Web | |||||
|
|
| BUC26 |
|
|
|
|
|
| card SC20G | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(Note 1)
(Note 2)
Note 1: The UPS stops automatically only when the battery is depleted. (Battery Mode continues until the battery is depleted.)
Note 2: Only the battery capacity can be monitored.
Note 3: This function can be used with Windows only. It cannot be used with Linux.
Note 4: For the latest information, check our website at:
Note 5: Compatible only with Macintosh computers equipped with PowerPC CPU.
[Explanation of software functions]
1Auto shutdown The computer can be shut down automatically when a problem occurs with the power supply.
2UPS monitoring (operating status) The operating status of the UPS can be monitored (in Commercial Power Mode/Battery Mode).
3UPS monitoring (data) Monitoring can be performed for input voltage value, connection capacity, battery capacity, etc.
4
5Shutdown when OS is inactive Shutdown can be performed when the computer is in an inactive state. The operating status is retained at shutdown in inactive state, so operation details are not lost.
6Auto file save Files such as open Word and Excel documents are automatically saved at shutdown.
7Schedule operation Schedule settings can be made for UPS stop/start.
8UPS setting change UPS settings (beep ON/OFF, etc.) can be changed. (Items that can be set vary according to the UPS.)
9External command execution By executing commands at shutdown, items such as application programs can be launched.
10Event log save Information of events that occur on the UPS (power supply problems, setting changes, occurrences of failure, etc.) are saved as a log.
11Data log save Data of input/output voltage value, connection capacity, etc. is periodically saved as a log (the save frequency can be set).
12Coordinated shutdown When a problem occurs with the power supply, multiple computers connected to the UPS can coordinate to perform auto shutdown.
13Output receptacle control The UPS output receptacles can be individually set to ON/OFF.
14Redundant power supply support Two or more UPS can be connected to computers equipped with redundant power supply. Shutdown is not performed when a power supply proble affects only one of the units.
Shutdown is performed only when a power supply problem occurs with both UPS, so the system's operating rate is improved.
15Remote UPS management The UPS can be managed remotely from a computer on the network.
16Mail send When a problem such as a power failure occurs, a notification email describing the problem can be sent to the system administrator.
17SNMP management UPS management information can be sent to the SNMP manager.
18Telnet connection Settings such as shutdown parameters can be made via the Telnet connection.
19SYSLOG support UPS management information can be recorded in SYSLOG.
66