GE A8950CC Installing the Video Module, Install video input module, Install video output module

Installing the Video Module

Overview

The Phoenix A8900VI input module is capable of inserting up to four baseband, composite video signals per card. A maximum of four cards can be installed in any node, allowing up to 16 inputs per node.

The Phoenix A8905VO output module is capable of outputting up to 4 base band, composite video signals per card. A maximum of four cards can be installed in any node, allowing up to 16 outputs per node.

Tools and materials required

The video modules are held in place with simple thumbscrews with screwdriver slots. The only tool recommended is a small flat blade screwdriver.

Installation instructions:

1. Install video input module:

As shown below, install video Input modules in slots 5, 6, 7, or 8 (color-keyed green) and secure. Up to four modules may be installed per Phoenix node. Up to four incoming video signals can be installed per module by connecting to BNC mounts (four) on each card.

INSERT VIDEO INPUT MODULES IN SLOTS 5-8 (Green)

2. Install video output module:

As shown below, install video output modules in slots 11, 12, 13, or 14 (color-keyed blue) and secure. Up to four modules may be installed per Phoenix node. Up to four outgoing video signals for monitoring or recording can be installed per module by connecting to BNC mounts (four) on each card.

INSERT VIDEO OUTPUT MODULES IN SLOTS 11-14 (Blue)

13