GE A8950CC installation instructions Installation Instructions

Installation Instructions	Phoenix Fiber Optic Communication System
BEFORE YOU BEGIN		1
GETTING STARTED		2
Overview		2
Determine Mounting Configuration		2
Installing Power Supply		2
INSTALLING THE OPTICAL TRANSCEIVER MODULE		3
Point-to-Point, Repeater, Self-Healing Ring Diagrams		4
LED Operating Status		5
INSTALLING THE DATA MODULE		6
Configuring the Data Module		6
Install Data Module		7
Connect Data Module		7
Channel Mapping		7
Connection Instructions		8
RS-232, TTL, RS-422, RS-485, Manchester/Biphase Interface		9
RS-485, Sensornet, Test Mode		9
Data Module - Channel Sequence		10
INSTALLING THE ETHERNET MODULE		11
Install Ethernet Module		11
Connect Ethernet Module		12
INSTALLING THE VIDEO MODULE		13
Install Video Input Module		13
Install Video Output Module		13
Connection Instructions		14
Video Module - Channel Sequence		15
INSTALLING THE AUDIO MODULE		16
Configuring the Audio Module		16
Audio Input Termination Diagrams		17
Audio Input/ Output Charts		18
Audio Module - Channel Sequence		19
INSTALLING THE CONTACT CLOSURE MODULE		20
Install Contact Closure Module		20
Connection Instructions		21
RJ45, Contact Input/ Contact Output Charts		22
Contact Input/ Contact Output - Channel Sequence		22
CONFIGURING THE PHOENIX FIBER OPTIC COMMUNICATION SYSTEM		23
Turn on power and check status		23
Select the system topology		24-26
Set the node ID		26
FRONT PANEL MENU TREE AND DESCRIPTIONS		27
Main Menu Options		28-31
Menu Options: Video		31-33
Menu Options: Data		34-36
Menu Options: Ethernet		37
Menu Options: Audio		38-39
Menu Options: Contact Closure		39-41
MAIN LOCAL POWER/ MAIN LOCAL TEST/ MAIN LOCAL ABOUT		41-42
MAIN REMOTE/ MAIN ABOUT		42-43
BLANK PANEL SPECIFICATIONS AND LIMITED WARRANTY		44
OPTICAL TRANSCEIVER MODULE SPECIFICATIONS		45
DATA MODULE SPECIFICATIONS		46
ETHERNET MODULE SPECIFICATIONS		47
VIDEO MODULE SPECIFICATIONS		48
AUDIO MODULE SPECIFICATIONS		49
CONTACT CLOSURE MODULE SPECIFICATIONS		50
CUSTOMER SUPPORT		50