GE A8950CC Getting Started, Overview, Determine Mounting Hardware, Installing Power Supplies

Page 4

Getting Started

** CAUTION:

This product contains ESD-sensitive components. Although all precautions have been made to reduce ESD susceptibility, use good grounding techniques when handling uninstalled modules.

Overview

Installing the Phoenix chassis is a three-step process:

1.Install mounting hardware and power supplies.

2.Install modules and connect cabling.

3.Configure the system.

Determine Mounting Hardware

Mounting brackets are adjustable. Choose the best location to fit your application and position brackets using the supplied hardware. Remove screws holding front mounting bracket, move to top, bottom, back or front and refasten.

Installing Power Supplies

All installation should be from rear of rack unit.

To install power supply, slide power supply in slot "A" and secure with hardware. Remove center support panel and use to cover open slot if redundant power supply is not used.

Optional Redundant Power Supply: When using the redundant power supply, remove panel and insert second power supply in slot "B" and secure.

	Model
Model	Slot A.

Slot B

A8960AC

Optional Redundant Power Supply

Specifications

	Model	A8960AC

	Size	1.65 in. W x 3.30 in. H x 8.00 in. D (42 x 84 x 203 mm)

	Weight	1.25 lb. (5.67 g)

Spare fuse

Active fuse

Electrical

•Input power: 100 V to 240 V, 60 to 50 Hz

•Current requirement: 2 A

•Power consumption: 40 W

•Protection: 250 V, 2 A fuse

Module Installation

The Optical Transceiver is the first module to be installed.

2

Image 4

Contents Installation instructions Installation Instructions Before You Begin Intended UseCustomer Support Conventions Used in this ManualInstalling Power Supplies Module InstallationGetting Started OverviewInstalling the Optical Transceiver Module Installation instructionsTools and materials required Connect fiberRepeater Connect Point-to-Point ConnectSelf-Healing Connect LED operating status Optic LEDConfigure data module Installing the Data ModuleSetting Mode Install data module ConnectUsing the breakout box Fiber Link Data ConnectionsPin Signal RS-485 4-WIRE Interface Data module channel sequenceInstalling the Ethernet Module Install the Ethernet moduleConfigure Install video input module Installing the Video ModuleInstall video output module Video Inputs Connection instructionsVideo Outputs Video Input module channel sequence Video Output module channel sequenceInstalling the Audio Module Configure audio moduleInstalling audio modules Channel sequence is as followsConnecting to audio modules Audio module channel sequence Terminal Block Pin AssignmentsInstalling the Contact Closure Module Install contact closure moduleConnect to the module RJ45 Socket Viewed from the rear of the unitContact Input module channel sequence Configuring the Phoenix Fiber Optic Communications System Turn on power and check status Select the system topologyGE Security Set the Node ID Front Panel Menu Tree and Descriptions Main Local Main MenuMain Local Node Main Local Node ID Main Local Node TopologyMain Local Node Load Defaults Main Local OpticsMain Local Optics Transmit Main Local Optics ReceiveMain Local Video Main Local Optics InfoMain Local Video Input Mapping Main Local Video Output Mapping Video Test Channel Test Off Format Ntsc Main Local Data Main Local Data Input MappingMain Local Data Output Mapping Main Local Data Format Select Main Local Ethernet Main Local Ethernet Port StatusMain Local -Ethernet Port Control Main Local -Ethernet Port TrafficMain Local Audio Input Mapping Main Local AudioMain Local Audio Output Mapping Main Local Contacts Main Local Audio TestMain Local Contacts Input Mapping Main Local Contacts Configure Main Local Contacts Output MappingMain Local Power Main Local TestMain Local Test LED/LCD/Alarm Main Local Test TempMain Local Test Video Main Local Test DataMain Remote Main AboutBlank Panel Installation and Specifications Overview Limited warrantyOptical Transceiver Module Specifications Product orderingData Module Specifications DataEthernet Module Specifications EthernetVideo Module Specifications VideoAudio Module Specifications Product 0rderingContact Closure Module Specifications Contacts / Relays