Falcon XG2.2K-1T, XG1.5K-1T, XG3K-1T manual Introduction

Page 4

Do not dispose of battery pack or batteries in a fire. The battery may explode. Do not open or mutilate the battery pack. Released electrolyte is harmful to skin and eyes. It may be toxic.

CAUTION

A battery can present a risk of electrical shock and high short circuit current. The following precautions should be observed when working on batteries:

Remove watches, rings, and other metal objects.

Use tools with insulated handles.

1.0INTRODUCTION

Manual Overview

This user manual has been written to provide basic information about the Falcon XG Series UPS Plus. XG models are available in nominal power ratings of 1500, 2200 and 3000 VA . The XG Series is a compact, double conversion, “on-line” UPS. It provides continuous power conditioning, tight output voltage regulation and a true sinewave output. The XG Series UPS protects your sensitive electronics equipment against the widest range of power problems, including power failures, power sags, power surges, brownouts, line noise, high voltage spikes, frequency variations, switching transients, and harmonic distortion.

This manual also describes unpacking, unit installation, the major features of XG series UPS, as well as detailing operation, configuration and troubleshooting.

The specifications section states all of the detailed parameters of operation for the Series, and provides general information on approvals and certifications.

Brief XG Overview

The Falcon XG Series UPS may be installed in either of two formats. Brackets are supplied to facilitate installation into a standard 2U, 19 inch equipment rack slot, or free-standing on a table top in a mini-tower tower format.

The XG Series front panel features includes a graphical LCD display to indicate the status of the operation. The display enables the user or field service engineer to easily monitor and troubleshoot localized power problems, in addition to UPS operation. UPS control is accomplished through STANDBY, FUNCTION/TEST and SET/ALARM SILENCE buttons. Two levels of audible alarms are also provided when the unit is operating on battery.

The XG Series rear panel has an RS-232 port to provide communications between the UPS and a network server or other computer systems. This port when used along with the supplied UPSILON software, gives the ability to remotely test the UPS, set UPS parameters, monitor power status. The software will also automatically save open computer files and initiate an unattended shutdown, in the event of a loss of utility.

4

Image 4
Contents Owners Operating Manual Table of Contents Battery InstallationStorage and Transportation Introduction Block Diagram Circuit DescriptionsInstallation FREE-STANDING UPS Installation RACK-MOUNT UPS SetupInspecting the Equipment Page FREE-STANDING UPS Installation Mounting feet Mounting feet for additional Battery Modules Battery Module Installation Display & Controls SET/ALARM Silence BypassFUNCTION/TEST Indicators and Icons Located on the LCD Display Controls FUNCTION/TEST ButtonNormal ON-LINE Mode Battery ModeOperation Operating ModesGreen Mode Bypass ModeTurning the UPS on UPS Setup Configuration How To Place The UPS Into Setup/CONFIGURATION ModeGreen Mode Function BIT Turning the UPS OFFHow to Set the UPS Output Voltage How to Enable or Disable Green ModeConfiguration Mode An Example of How to Set the UPS Output Voltage to 115Vac CommunicationsRS-232 Port PIN #Standard Dry Contact Interface Card Novell style UA88374 Relay Option BoardMaintenance UPS and Battery CareWhen to Replace Batteries Battery Pack ReplacementInternal Battery Pack Replacement Testing NEW Batteries Recycling the Used BatteryFuse Replacement Troubleshooting Troubleshooting GuideTroubleshooting Guide UPSDimensions WeightInternal Battery Pack InputModel Number XG2.2K-1T Battery RUN Times Warranty General Provisions