NOTE!
The
Use the following procedure to install the UPS in a rack:
1.Place the UPS on a flat, stable surface with the front of the UPS facing you.
2.Align the mounting ears with screw holes on the side of the UPS and secure with the supplied screws.
3.If installing the Battery Module, repeat above STEPS.
4.For slide rail installations, fasten the inner parts of the slide rails to the UPS on both sides with the screws provided.
5.** Securing hardware and slide rails are sold separately. Contact Falcon Electric for these additional options and any assistance needed.**
6.Attach the two mounting brackets to the rack’s mounting rails. The brackets allow adjustment of up to eight inches of the slide assembly mounting position,
8