Datacard Group RL90, RP90 Using the LCD menus, About the Printer LCD panel, Printer LCD panel on

Using the LCD menus

Using the LCD menus

About the Printer LCD panel

The printer LCD panel has a 2-line display, six keys, a Ready light, Error light, and speaker.

The display background color changes according to the printer's function; the background is bright green during initialization, orange while processing a card, and red on printer error. These colors can be changed using the LCD panel.

Ready LED (green)

Steady Green	The printer is ready and waiting to print cards.
Blinking	The printer is receiving data.
Off	The printer stopped due to error, initialization or preheat mode, or
	operator setting preferences.

Error LED (red)

On	The printer has a condition that requires service or the printer did
	not power on correctly. To correct the condition, press the RESET
	and then the ENTER key. If this does not correct the condition,
	power the printer off, and then back on before calling for service.
OFF	Normal status

Keys:

Reset	Initializes the printer. Use the Reset key after loading supplies, to
	end Power Saving, or after an error occurs.
Menu	Press MENU to access the printer settings. Continue to press the
	MENU key to access the settings in the order listed in “Using the
	Printer LCD panel” on page 36.
Enter	Confirms the user selection.
Arrow Keys	Use the up and down arrow keys to select options within a menu
	selection.
Exit	Exits the current menu or menu selection and returns user to the
	previous menu selection.

LCD Display

Line one of the display shows the current printer or mode status. The > symbol following a menu selection indicates that there are subcategories listed within the selection. Use the up and down arrow keys to select these options.

RP90 Plus E and RL90 User Guide 35