ENGLISH
10. USING A NEW TRANSMITTER
Using a New Transmitter
If you purchase a new WearLink+ Hybrid transmitter or a new WearLink W.I.N.D. transmitter as an accessory, it has to be introduced to the training computer. This is called pairing and takes only a few seconds. Pairing ensures that your training computer receives signals from your accessory only, and enables
Please note that WearLink W.I.N.D. transmitter does not measure heart rate in water.
Pairing a New Transmitter With Training Computer
Wear the transmitter and make sure that you are not near (40 m/131 ft) other Polar WearLink Hybrid/ WearLink W.I.N.D. transmitters.
1.Go to Menu > Settings > Sport profiles > Sport > Heart rate transmitter > Search new and press OK.
2.The training computer starts searching for the transmitter signal, Searching for new heart rate transmitter is displayed.
3.Once the new transmitter is identified, Heart rate transmitter is found is displayed. Pairing is complete.
4.If the search is not successful, Heart rate transmitter not found or Other heart rate transmitters interfering. Move further. , Try again? YES / NO is displayed.
5.Select YES to start the search again.
6.Select NO to cancel the searching.
7.To return to time mode, press and hold the BACK button.
40Using a New Transmitter