Novatel SMART-AG user manual THISPORT31

Commands					Appendix B
		ASCII Port	Hex Port	Decimal Port	Description
		Name	Value	Value a
		THISPORT_31	df	223	Current COM port, virtual port 31
		FILE	e0	224	User-specified file destination, 0 c
		FILE_1	e1	225	User-specified file destination, 1 c
	. . .
		FILE_31	ff	255	User-specified file destination, 31 c
		XCOM1	1a0	416	Virtual COM1 port, virtual port 0
		XCOM1_1	1a1	417	Virtual COM1 port, virtual port 1
	. . .
		XCOM1_31	1bf	447	Virtual COM1 port, virtual port 31
		XCOM2	2a0	672	Virtual COM2 port, virtual port 0
		XCOM2_1	2a1	673	Virtual COM2 port, virtual port 1
	. . .
		XCOM2_31	2bf	703	Virtual COM2 port, virtual port 31
		USB1	5a0	1440	USB port 1, virtual port 0
		USB1_1	5a1	1441	USB port 1, virtual port 1
	. . .
		USB1_31	5bf	1471	USB port 1, virtual port 31
		USB2	6a0	1696	USB port 2, virtual port 0
	. . .
		USB2_31	6bf	1727	USB port 2, virtual port 31
		USB3	7a0	1952	USB port 3, virtual port 0
	. . .
		USB3_31	7bf	1983	USB port 3, virtual port 31
		AUX	8a0	2208	AUX port, virtual port 0 b
	. . .
		AUX_31	8bf	2239	AUX port, virtual port 31 b
		XCOM3	9a0	2464	Virtual COM3 port, virtual port 0
	. . .
		XCOM3_31	9bf	2495	Virtual COM3 port, virtual port 31

a.Decimal port values 0 through 16 are only available to the UNLOGALL command and cannot be used in the UNLOG command, or in the binary message header.

b.The AUX port is available on OEMV-2-based and OEMV-3-based products.

c.SMART-AG only. Refer to the SMART-AG Firmware Reference Manual and CDU’s Help file.

SMART-AG User Manual Rev 2 63